424157

Olivetti ofx 2100 Manual

9
Zoom out
Zoom in
Previous page
1/127
Next page
Notice for Connection to the Telecommunication Systems
1. BABT Certificate Number/Approval Number for the OFX 2100: NS/1258/3/P/603987.
APPROVED for connection to telecommunication systems specified in the instructions for use subject
to the conditions set out in them.
2. This apparatus has been approved for the use of the following facilities.
1. Storage of telephone numbers for retrieval by a predetermined code. (If problems occur, verify
stored number).
2. Automatic Call initiation
3. Use on a PABX which returns Secondary Proceed Indication.
4. Operation in the presence or absence of Initial or Secondary Proceed Indication.
5. Automatic Dialling Facilities
6. Automatic Storage of last number dialled
7. Automatic Repeat Attempt Facilities
8. Auto Clear from the call originating end
9. Series Connection Facility
10. Call Progress Monitor
Any other usage will invalidate the approval of the apparatus if as a result, it then ceases to conform
to the standards against which approval was granted.
3. The connection to the telecommunication systems must be unplugged before the earth is disconnected.
The connection to the telecommunication systems must not be hardwired.
4. This apparatus may be used on telecommunication systems employing loop disconnect of MF signalling.
5. This apparatus is not suitable as an extension to a payphone for use on shared service lines or for use
on 1+1 carrier systems.
6. THE USER MUST ENSURE THAT ALL TELEPHONE NUMBERS PROGRAMMED INTO THE "SPEED
DIALLING" AND "CODED SPEED DIALLING" MEMORIES ARE ENTERED CORRECTLY.
7. This apparatus is suitable for connection only to direct exchange lines on the path directly or via a
compatible PABX. The supplier of the apparatus should be consulted for an up to date list of PABXs with
which the apparatus is compatible.
It cannot be guaranteed that the apparatus will operate under all possible conditions of connection to a
compatible PABX. Any cases of difficulty should be referred in the first instance to the supplier of the
apparatus.
notice.p65 13/04/00, 23.141
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ofx 2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ofx 2100 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info