16706
55
Zoom out
Zoom in
Previous page
1/64
Next page
31
1. Lower the handset and place it on a stable surface (fig. 1).
2. Open and lift the operator console as indicated by the arrows
(fig. 2).
3. Release the print head by pressing the lever as indicated by the
arrow (fig. 3).
4. Take the print head out of its compartment (fig. 4).
5. Clean the electrical contacts using a slightly damp cloth (fig. 5).
Warning!
Do not touch the nozzles.
6. Clean the electrical contacts of the print carriage with a slightly
damp cloth (fig. 6)
7. Insert the print head in its compartment with the electrical contacts
facing towards the print head compartment.
8. Push the print head until it clicks into place.
9. Close the operator console and put the handset back on its sup-
port.
T
O
CLEAN
THE
OPTICAL
READER
Dust accumulating on the glass surface of the optical reader may
cause problems in the scanning of documents. To avoid these prob-
lems, the glass should be cleaned every now and again as follows:
With the fax machine disconnected from the power socket:
5. To confirm the setting, press the key:
The display shows:
CLEANING: ON
The fax machine cleans the print head and tests the noz-
zles, printing out the result of the diagnostic test.
Examine the diagnostic test result and consult "Insert the
print head", chapter "How to get started quickly".
NOTE
The procedure may be aborted at any time, if desired, by pressing
the
key.
NOTE
If the quality of the test result still fails to meet your expectations after
carrying out the cleaning procedure, continue as follows, stopping
when you get a satisfactory printing quality:
- Make a copy of a document with the desired type of graphics or
text on the fax machine and evaluate its quality.
- Change the type of paper (the paper in use could be excessively
porous) and repeat the procedure.
- Remove and reinsert the print head.
- Remove the print head and check that there are no foreign bodies
on the print nozzles; if there are, remove them carefully, taking
care not to touch the electrical contacts. Finally, reinstall the print
head.
- Remove the print head and clean the electrical contacts both on
the print head and on the print head carriage, see "To clean the
electrical contacts of the print head", below.
- Reinstall the print head.
- Call the engineering service.
T
O
CLEAN
THE
ELECTRICAL
CONTACTS
OF
THE
PRINT
HEAD
With the fax machine disconnected from the power socket:
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti LAB_S120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti LAB_S120 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti LAB_S120

Olivetti LAB_S120 User Manual - German - 64 pages

Olivetti LAB_S120 User Manual - Dutch - 64 pages

Olivetti LAB_S120 User Manual - Danish - 64 pages

Olivetti LAB_S120 User Manual - French - 64 pages

Olivetti LAB_S120 User Manual - Italian - 64 pages

Olivetti LAB_S120 User Manual - Portuguese - 64 pages

Olivetti LAB_S120 User Manual - Swedish - 64 pages

Olivetti LAB_S120 User Manual - Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info