16706
46
Zoom out
Zoom in
Previous page
1/64
Next page
22
TO CHANGE THE REMOTE CONTROL CODE
If the fax machine is connected to an extension that oper-
ates in tone dialling mode and is set up for manual
reception, whenever there is a call from a correspondent
wishing to send you a document, you can set it to receive
the document by typing the code
* * on the extension. This
operation has the same effect as pressing the key
on the fax machine.
You can replace the second "asterisk" of this code using
digits from 0 to 9.
1. Press the key
until the display shows:
INSTALLATION
2. Press the key:
The display shows:
TEL. LINE SET-UP
3. Press the key
The display shows the line to which the fax machine was set
to be connected, for example:
PUBL.LINE (PSTN)
4. Press the key
until the display shows:
REMOTE START:ON
5. Press the key:
The display shows the code you set previously, for ex-
ample:
TYPE CODE
CODE(0/9,*) *8
6. To type the new code, press the keys:
-
7. To confirm the new code, press the key:
8. To return the fax machine to its initial stand-by mode, press
the key:
NOTE
If you want to disable this function, after the fourth step, press the
|
/
}
keys to display: "REMOTE START:OFF", then press the key
to confirm and the
key to return the fax machine to its initial
stand-by mode.
nOTE
If you are connected to a private line, follow the same procedure until
the display shows "PUBL.LINE (PSTN)", press the
|
/
}
keys to dis-
play: "PRIV.LINE (PBX)" and then continue as described in the pro-
cedure.
O
THER
USEFUL
TRANSMISSION
SETTINGS
TO CHANGE THE POSITION OF YOUR NAME AND FAX
NUMBER
The information in the heading of the document to be sent
(name, fax number, date and time and number of pages)
may be received by your correspondent's fax machine
outside the text area immediately below the top edge of the
sheet or inside the text area, slightly lower down than in the
previous case.
Your fax machine is designed to send this information inside
the text area.
To change the position
1. Press the key
until the display shows:
FAX SET-UP
2. Press the key:
The display shows:
DATE AND TIME
3. Press the key:
The display shows:
VARIOUS SETTINGS
4. Press the key
until the display shows:
HEADER INSIDE
5. To select the alternative parameter, press the keys:
/ The display shows:
HEADER OUTSIDE
6. To confirm the setting, press the key:
7. To return the fax machine to its initial stand-by mode, press
the key:
TO ENABLE/DISABLE REPETITION OF A FAILED
TRANSMISSION
FROM THE MEMORY
1. Press the key
until the display shows:
FAX SET-UP
2. Press the key:
The display shows:
DATE AND TIME
3. Press the key:
The display shows:
VARIOUS SETTINGS
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti LAB_S120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti LAB_S120 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti LAB_S120

Olivetti LAB_S120 User Manual - German - 64 pages

Olivetti LAB_S120 User Manual - Dutch - 64 pages

Olivetti LAB_S120 User Manual - Danish - 64 pages

Olivetti LAB_S120 User Manual - French - 64 pages

Olivetti LAB_S120 User Manual - Italian - 64 pages

Olivetti LAB_S120 User Manual - Portuguese - 64 pages

Olivetti LAB_S120 User Manual - Swedish - 64 pages

Olivetti LAB_S120 User Manual - Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info