16706

Olivetti LAB_S120 Manual

37
Zoom out
Zoom in
Previous page
1/64
Next page
13
The TAD access code may also be used to:
• prevent unauthorized subscribers from playing the messages sent
to you, in locale mode.
• prevent unauthorized subscribers from modifying the TAD con-
figuration parameters that you have set.
Follow the procedure described in "To change or delete the TAD
access code" until the display shows "PLAY UNLOCK" and then
proceed as follows:
1. To stop unauthorized users from playing the messages re-
ceived on the telephone answering device, press the keys:
/ The display shows:
PLAY LOCK
2. To confirm your choice, press the key:
The display shows:
SET-UP UNLOCK
3. To stop unauthorized users programming the telephone
answering device without your permission, press the keys:
/ The display shows:
SET-UP LOCK
4. To confirm your choice, press the key:
5. To return the fax machine to the initial stand-by mode, press
the key:
O
UTGOING
MESSAGES
AND
MEMOS
You can record several different types of outgoing messages:
• OGM 1, which has a maximum length of 20 seconds, prompting
the caller to leave a message on the TAD, for example:
"You have called the telephone number ... I’m out at the moment.
You can leave a message after the beep or press the Start button
on your fax machine if you want to send a fax. Thanks".
• OGM 2, which has a maximum length of 10 seconds, may be
recorded:
• if you are out and have selected the "TAD/FAX" reception
mode, to inform the caller that the answering device cannot
receive messages because its memory is full, for example:
"I’m sorry but I can only receive faxes at the moment. If you
need to speak to me, please call back later";
• if you are in but have selected "PHONE/FAX" mode, to tell the
caller not to hang up, for example:
"Please wait".
• CALL TRANSFER MESSAGE, which has a maximum length of
10 seconds, to inform you on a remote telephone that there
are new messages for you on the telephone answering device.
To actually transfer the new messages, you must:
• have set up the telephone answering device correctly (see
"To transfer messages and memos to a remote telephone"
later in this chapter).
• activate the functions that enable you to operate the telephone
answering device from a remote location (see "To operate the
telephone answering device from a remote location").
• MEMOS (Voice), which have a length that may be pro-
grammed to 30 or 60 seconds, for personal memos. This mes-
sage is never played when an incoming call is received.
T
O
CHANGE
OR
DELETE
THE
TAD
ACCESS
CODE
1. Press the key
until the display shows:
TAD SET-UP
2. To confirm the setting, press the key:
The display shows:
ICM ON SPEAKER
3. Press the key
until the display shows:
ACCESS CODE
4. Press the key:
The display shows the default code:
TYPE CODE
(0 - 9): 1234
You can now change the existing code (steps 7 and 8 of the
procedure) or clear it completely (steps 5 and 6 of the
procedure).
To delete the code:
5. Press the key:
The display shows:
TYPE CODE
(0 - 9):
6. To confirm the deleting, press the key:
The display shows:
TOLL SAVER
To change the code:
7. Enter the new code, for example "0001", pressing the keys:
- The display shows:
TYPE CODE
(0 - 9): 0001
8. To confirm the setting, press the key:
The display shows:
PLAY UNLOCK
9. In both cases, to return the fax machine to the initial stand-
by mode, press the key:
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti LAB_S120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti LAB_S120 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti LAB_S120

Olivetti LAB_S120 User Manual - German - 64 pages

Olivetti LAB_S120 User Manual - Dutch - 64 pages

Olivetti LAB_S120 User Manual - Danish - 64 pages

Olivetti LAB_S120 User Manual - French - 64 pages

Olivetti LAB_S120 User Manual - Italian - 64 pages

Olivetti LAB_S120 User Manual - Portuguese - 64 pages

Olivetti LAB_S120 User Manual - Swedish - 64 pages

Olivetti LAB_S120 User Manual - Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info