16706
15
Zoom out
Zoom in
Previous page
1/64
Next page
XI
Once the print head has been inserted, the operator
console closed and the handset replaced, the fax ma-
chine shows the message: "NEW PRINT HEAD?", "1 = YES,
0 = NO". Set the value 1; the fax machine starts the nozzle
cleaning and checking procedure, which is completed by:
the printing, on the sheet loaded automatically, of a diag-
nostic test sheet containing:
-a numbered scale, for checking the flow of ink and the
electrical circuits of the print head nozzles.
- a group of graphics and text, so that the printing qual-
ity may be evaluated.
the display shows the message: "CHECK PRINT OUT",
"1 = EXIT 0 = REPEAT".
Examine the print test sheet as follows:
1. Check that the numbered scale is not broken at any point
and that the black areas do not present any horizontal
white lines: if these conditions, which confirm that the print
head has been inserted correctly and is working properly,
are respected, set the value 1. The fax machine returns
to its
initial stand-by mode and is ready for use. The display shows
the message:
AUTOMATIC 00
25-10-04 11:23
C
D
E
2. On the other hand, if there are any breaks or white lines
present, set 0 to clean the nozzles again: if the new print test
continues to be unsatisfactory, repeat the procedure another
time. At this point:
if the printing quality still does not meet your expectations,
clean the electrical contacts and the nozzles as indicated in
the "To clean the electrical contacts of the print head"
section of the "Maintenance operations" chapter.
if the printing quality is satisfactory, set the value 1. The
fax machine returns
to its initial stand-by mode and is
ready for use.
IMPORTANT
When the print head is about to run out of ink, the display
shows:
INK LOW
When there is no ink left, the display shows:
OUT OF INK
To replace the print head, see the section "Maintenance op-
erations".
To buy new print heads, see the corresponding code at
the end of the manual.
H
OW
TO
GET
STARTED
QUICKLY
IMPORTANT
Once the print head provided with the machine is
worn, remember only to use original print heads
(see code printed at the end of the manual).
If, after the print head has been installed, the "CHECK
PRINT HEAD" message appears again, try remov-
ing it and then reinserting it, pressing it more firmly into
position. If the message remains on the display, re-
move the print head and clean the electrical contacts
of the print head and the carriage, see "To clean the
electrical contacts of the print head", section
"Maintenance operations".
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti LAB_S120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti LAB_S120 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti LAB_S120

Olivetti LAB_S120 User Manual - German - 64 pages

Olivetti LAB_S120 User Manual - Dutch - 64 pages

Olivetti LAB_S120 User Manual - Danish - 64 pages

Olivetti LAB_S120 User Manual - French - 64 pages

Olivetti LAB_S120 User Manual - Italian - 64 pages

Olivetti LAB_S120 User Manual - Portuguese - 64 pages

Olivetti LAB_S120 User Manual - Swedish - 64 pages

Olivetti LAB_S120 User Manual - Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info