16688
54
Zoom out
Zoom in
Previous page
1/64
Next page
30
M
AINTENANCE
OPERATIONS
T
O
REPLACE
THE
PRINT
HEAD
1. Lower the handset and place it on a stable surface (fig. 1).
2. Open and lift the operator console as indicated by the arrows
(fig. 2).
3. Release the print head by pressing the lever as indicated by the
arrow (fig. 3).
4. Remove the used print head from its compartment (fig. 4).
5. Take the new print head out of its package and, holding it on both
sides, peel off the film covering the nozzles (fig. 5).
Warning!
6. Avoid touching the nozzles (fig. 7).
7. Avoid touching the electrical contacts (fig. 6).
8. Insert the new print head in its compartment with the electrical
contacts facing towards the print head compartment (fig. 8).
9. Push the print head until it clicks into place (fig. 9).
10. Close the operator console and put the handset back on its sup-
port.
note
If you have replaced the print head because the ink ran out, when
the operator console is closed, the fax machine will automatically
recognize that the print head has been replaced and the display will
show the message "NEW PRINT HEAD? 1 = YES, 0 = NO". Set the
value 1.
At this point, the fax machine automatically cleans the print head
and tests the nozzles, printing out the result of the diagnostic test.
Examine the diagnostic test result with reference to "Insert the print
head", chapter "How to get started quickly".
If you replaced the print head because of a deterioration in print-
ing quality, proceed as follows:
1. Press the key
until the display shows:
HEAD MAINTENANCE
2. Press the key:
The display shows:
NEW HEAD: ON
3. Press the key:
The display shows:
CLEANING: ON
The fax machine cleans the print head and tests the noz-
zles, printing out the result of the diagnostic test.
Examine the diagnostic test result and consult "Insert the
print head", chapter "How to get started quickly".
C
LEANING
THE
PRINT
HEAD
AND
TESTING
THE
NOZZLES
If you notice a deterioration in print quality, you can
quickly clean the print head and test the nozzles by follow-
ing a procedure that ends by printing out the diagnostic test
result with regard to its condition.
1. Press the key
until the display shows:
HEAD MAINTENANCE
2. Press the key:
The display shows:
NEW HEAD: ON
3. To view the other available option: "NEW HEAD: OFF",
press the keys:
/
4. To confirm your choice, press the key:
The display shows:
CLEANING: ON
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti LAB_S100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti LAB_S100 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti LAB_S100

Olivetti LAB_S100 User Manual - German - 64 pages

Olivetti LAB_S100 User Manual - Dutch - 64 pages

Olivetti LAB_S100 User Manual - Danish - 64 pages

Olivetti LAB_S100 User Manual - French - 64 pages

Olivetti LAB_S100 User Manual - Italian - 64 pages

Olivetti LAB_S100 User Manual - Portuguese - 64 pages

Olivetti LAB_S100 User Manual - Swedish - 64 pages

Olivetti LAB_S100 User Manual - Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info