16670
52
Zoom out
Zoom in
Previous page
1/64
Next page
28
S
IGNALS
AND
MESSAGES
Any problems that may arise are generally indicated by acoustic
signals (accompanied, in some cases, by visual signals: error
LED " " indicator on) or by error messages on the display.
The fax machine also emits acoustic signals and shows mes-
sages on the display, which do not indicate an error condition.
ACOUSTIC ERROR SIGNALS
Short 1 second signal
You pressed an incorrect key during an operating phase.
Long 3 second signal plus error LED indicator on
Transaction not carried out correctly.
Continuous signal
Request to hang up if you forgot to do so after an operation that
required the handset to be lifted.
note
To turn off the ERROR LED " " indicator, press the key.
ERROR MESSAGES ON THE DISPLAY
AUTOREDIAL NNN
No connection was established due to line errors or because the
correspondent is busy: the fax machine prepares to redial automati-
cally.
CHECK DOCUMENT, PRESS
The document is not being fed correctly: replace the document on the
ADF and press the
key to restore the fax machine’s normal
operation.
CHECK PAPER, PRESS
The paper in the feeder has run out: add some more and press
to clear the message from the display.
The paper is not being fed correctly: replace the paper in the
feeder and press the
key to restore the fax machine’s
normal operation.
CHECK PRINT HEAD
The fax machine does not detect the presence of the print head
because you have forgotten to install it or you have installed it
incorrectly: install/reinstall the print head.
Some of the print head nozzles are damaged and are having a
negative effect on the printing quality: clean the print head (see
"Cleaning the print head and testing the nozzles", chapter
"Maintenance operations").
COPY INTERRUPTED
You aborted the copy operation by pressing the key.
An error occurred during the document copying phase, prevent-
ing it from being printed: check the type of fault on the display and
correct it.
COVER OPEN
You forgot to close the print head compartment cover: close it.
DOC IN MEMORY
The document received was saved because an error occurred dur-
ing the reception phase, preventing it from being printed immediately:
check the type of error (paper out or jammed, ink out, cover open,
etc.) and correct the fault.
MEMORY FULL
One or more documents received in the memory, due to an error that
occurred during reception, have filled the memory: check the type of
fault (missing or jammed paper, ink out, cover open, etc.) and correct
it. The documents will be printed automatically thus freeing space in
the memory.
NOT PROGRAMMED
You chose a one-touch dialling key or a speed dialling code that you
have not set: program the key or the code (see "To set one-touch
and speed dialling", chapter "Transmission and reception op-
erations").
OUT OF INK
The ink in the cartridge has run out: replace the print head (see "To
replace the print head", chapter "Maintenance operations").
PAPER ERROR, PRESS
A sheet of printing paper got jammed during the copying or reception
phase: press the
key and then, if the sheet is not unloaded
automatically, check where it is jammed and remove it (see "To re-
move jammed sheets of paper", chapter "Maintenance opera-
tions").
POLL.RETRY NNN
You set polling reception and the connection was not established due
to line errors or because the correspondent is busy: the fax machine
prepares to redial automatically.
REMOVE DOCUMENT, PRESS
A document jammed while the document was being copied or sent:
press the
key then, if the document is not unloaded auto-
matically, remove the jammed document by hand (see "To re-
move jammed documents", chapter "Maintenance opera-
tions").
You aborted the document scanning phase by pressing the
key.
RX ERROR
The document was not received correctly: press the key to
turn off the "
" error LED indicator and clear the message from the
display.
RX IN MEMORY
Reception continues in the memory because an error occurred dur-
ing the reception of a document, preventing it from being printed:
check the type of fault on the bottom line of the display and correct it.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti LAB_M100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti LAB_M100 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti LAB_M100

Olivetti LAB_M100 User Manual - German - 64 pages

Olivetti LAB_M100 User Manual - Dutch - 64 pages

Olivetti LAB_M100 User Manual - French - 64 pages

Olivetti LAB_M100 User Manual - Italian - 64 pages

Olivetti LAB_M100 User Manual - Portuguese - 64 pages

Olivetti LAB_M100 User Manual - Swedish - 64 pages

Olivetti LAB_M100 User Manual - Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info