Manual Olivetti LAB_100 (page 45 of 64) (English)

16535

Zoom out

Zoom in

1/64

4. Press the key

until the display shows:

RING VOLUME:HIGH

5. To view the other available options, "RING VOLUME:LOW",

"RING VOLUME: MED" and "RING VOLUME:OFF", press

the keys:

6. To confirm your choice, press the key:

7. To return the fax machine to its initial stand-by mode, press

the key:

TO ENABLE/DISABLE RECOGNITION OF THE RING

FREQUENCY

In some countries, local telephone companies offer the pos-

sibility of assigning the same telephone line two or

more numbers, corresponding to different users. When

an incoming call is received, a different ring frequency

will indicate which user is to answer the call.

This function is extremely useful at home or in small offices,

where the same telephone line is shared by more than one

person.

Your fax machine is capable of "learning" one of

these frequencies (see the procedure that follows). In

this way, when a call with the specific ring frequency is

received, the fax machine (in "PHONE/FAX" and "TAD/

FAX" reception modes) prepares exclusively to receive a

document.

This function is particularly useful when associated

with silent reception in that the fax machine will only ring

if the call is coming from a telephone.

1. Press the key

until the display shows:

INSTALLATION

2. Press the key:

The display shows:

TEL. LINE SET-UP

3. Press the key:

The display shows:

ENHANCED FEATUR.

4. Press the key

until the display shows:

DISTINC.RING:OFF

5. Press the keys

/ until the display shows:

CHANGE PATTERN

6. To confirm your choice, press the key:

The display shows:

AUTODETECT. RING

7. Call the fax machine with the desired frequency so that the

fax machine detects it.

The display shows:

RING DETECTED

8. To return the fax machine to its initial stand-by mode, press

the key:

notE

If the fax machine cannot detect that particular frequency, the display

will show the message "RING NOT DETECT.". At this point, press

the

key and repeat the procedure.

TO CHANGE THE LENGTH OF THE ACOUSTIC SIGNAL

This function is only enabled in some countries.

When the fax machine is set up for automatic reception

with recognition of the type of call, it behaves as

follows:

• if it is being called by a fax machine, it will automatically

prepare to receive a document after the preset number of

rings

• if it is being called by a telephone, it will emit an acoustic

signal for a time of 20 seconds, after which, if you still have

not lifted the handset, it will automatically prepare to re-

ceive a document.

If you want, you can change the length of the acoustic signal

as follows:

1. Press the key

until the display shows:

INSTALLATION

2. Press the key

until the display shows:

FAX/TEL TIMER:20

3. To view the other available values, "15", "30" or "40",

press the keys:

4. To confirm your choice, press the key:

5. To return the fax machine to its initial stand-by mode, press

the key:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti LAB_100 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti LAB_100

Olivetti LAB_100 User Manual - German - 64 pages

Olivetti LAB_100 User Manual - Dutch - 64 pages

Olivetti LAB_100 User Manual - Danish - 64 pages

Olivetti LAB_100 User Manual - French - 64 pages

Olivetti LAB_100 User Manual - Italian - 64 pages

Olivetti LAB_100 User Manual - Portuguese - 64 pages

Olivetti LAB_100 User Manual - Swedish - 64 pages

Olivetti LAB_100 User Manual - Spanish - 64 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olivetti LAB_100 Manual

Product: