424103
46
Zoom out
Zoom in
Previous page
1/52
Next page
40
M
AINTENANCE
OPERATIONS
T
O
REPLACE
THE
PRINT
HEAD
1. Open the operator console, as indicated by the arrow.
2. Lift the print head compartment cover using the lever, as shown in
the figure.
3. Release the print head by pressing the levers and then remove it
from its seat.
4. Take the print head out of its package and, holding it on both sides,
peel off the film covering the nozzles.
5. Avoid touching both the nozzles and the electrical contacts.
6. Insert the print head in its compartment with the electrical contacts
facing downwards.
7. Push the print head until it clicks into place and close the print head
compartment cover and the operator console.
note
If you have replaced the print head because the ink ran
out, when the print head compartment cover and the opera-
tor console are closed, the fax machine will automatically
recognize that the print head has been replaced and the
display will show the message "NEW PRINT HEAD? 1 =
YES, 0 = NO". Set the value 1.
At this point, the fax machine automatically cleans the
print head and tests the nozzles, printing out the result of
the diagnostic test. Examine the diagnostic test result with
reference to "To install the print head", chapter "Opera-
tions essential for correct operation".
If you replaced the print head because of a deterioration in
printing quality, proceed as follows:
Until the display shows:
HEAD MAINTENANCE
The display shows:
NEW HEAD: ON
The display shows:
CLEANING: ON
The fax machine cleans the print head and tests the noz-
zles, printing out the result of the diagnostic test.
Examine the diagnostic test result and consult "To install
the print head", chapter "Operations essential for cor-
rect operation".
C
LEANING
THE
PRINT
HEAD
AND
TESTING
THE
NOZZLES
If you notice a deterioration in print quality, you can
quickly clean the print head and test the nozzles by follow-
ing a procedure that ends by printing out the diagnostic test
result with regard to its condition.
Until the display shows:
HEAD MAINTENANCE
The display shows:
NEW HEAD: ON
/ To view the other available option: "NEW HEAD: OFF".
To confirm your choice. The display shows:
CLEANING: ON
The display shows:
CLEANING: ON
The fax machine cleans the print head and tests the noz-
zles, printing out the result of the diagnostic test.
Examine the diagnostic test result and consult "To install
the print head", chapter "Operations essential for cor-
rect operation".
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti fax lab 270 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti fax lab 270 in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti fax lab 270

Olivetti fax lab 270 User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info