424103

Olivetti fax lab 270 Manual

38
Zoom out
Zoom in
Previous page
1/52
Next page
32
TO CHANGE THE LENGTH OF THE ACOUSTIC SIGNAL
This function is only enabled in some countries.
When the fax machine is set up for automatic reception
with recognition of the type of call, it behaves as
follows:
• if it is being called by a fax machine, it will automatically
prepare to receive a document after the preset number of
rings
• if it is being called by a telephone, it will emit an acoustic
signal for a time of 20 seconds, after which, if you still have
not lifted the handset, it will automatically prepare to re-
ceive a document.
If you want, you can change the length of the acoustic signal
as follows:
Until the display shows:
INSTALLATION
Until the display shows:
FAX/TEL TIMER:20
/ To view the other available values: "15", "30" or "40". For
exemple: "40"
To confirm your choice.
To return the fax machine to the initial stand-by mode.
TO CHANGE THE SILENCE LAPSE
This function is only enabled in some countries.
Remember that if the silence lapse set on the external
answering machine is shorter than the one set on the
fax machine, the latter will never be able to automatically
prepare to receive a document in that the answering ma-
chine is activated first and, if no answering message is
heard within the preset number of seconds, it closes the
connection.
At this point, you must reduce the silence lapse set on
your fax machine so that it connects to the line first.
To change the silence lapse set on your fax machine, pro-
ceed as follows:
Until the display shows:
INSTALLATION
Until the display shows:
SILENCE LAPSE.: 6
/ To view the other available values: "3", "4", "8", "10" or
"OFF". For exemple: "4".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
TO ENABLE/DISABLE RECOGNITION OF THE RING
FREQUENCY
In some countries, local telephone companies offer the pos-
sibility of assigning the same telephone line two or
more numbers, corresponding to different users. When
an incoming call is received, a different ring frequency
will indicate which user is to answer the call.
This function is extremely useful in the home or small offices,
where the same telephone line is shared by more than one
person.
Your fax machine is capable of "learning" one of
these frequencies (see the procedure that follows). In
this way, when a call with the specific ring frequency is
received, the fax machine (in "PHONE/FAX" and "TAD/
FAX" reception modes) prepares exclusively to receive a
document.
This function is particularly useful when associated
with silent reception in that the fax machine will only ring
if the call is coming from a telephone.
For the model with a built-in TAD, we recommend you
disconnect the TAD before carrying out the recognition
procedure.
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SET-UP
Until the display shows:
ENHANCED FEATUR.
Until the display shows:
DISTINC.RING:OFF
/ Until the display shows:
CHANGE PATTERN
To confirm your choice. The display shows:
AUTODETECT. RING
Call the fax machine with the desired frequency so that the
fax machine detects it. The display shows:
RING DETECTED
To return the fax machine to the initial stand-by mode.
notE
If the fax machine cannot detect that particular frequency, the
display will show the message "RING NOT DETECT.". At
this point, press the
key and repeat the procedure.
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti fax lab 270 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti fax lab 270 in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti fax lab 270

Olivetti fax lab 270 User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info