424103
27
Zoom out
Zoom in
Previous page
1/52
Next page
21
T
O
MAKE
A
CALL
When you engage the line by lifting the telephone handset, you
may use all the telephone functions available on ordinary telephones
sold on the market.
These also include the R function (REGISTER RECALL, activated
by pressing the
key) which provides access to the special serv-
ices made available by the company that manages the telephone
network.
You can also use the following functions:
Call the correspondent using the fast dialling procedures set, see
"To telephone with one-touch dialling" and "To telephone
with speed dialling".
Momentarily hold a telephone call by pressing the
(HOLD)
key. The call is resumed as soon as the same key is pressed
again.
Activate the "handsfree" function (model with a built-in TAD
only), by pressing the
key before or during a telephone
call. This function is useful if you want other persons at your end to
take part in the conversation.
Stop the correspondent from listening to a conversation
at your end of the line, during a "handsfree" telephone call
(only model with built-in answering machine). Simply press
the
key during the conversation. To enable the correspondent
to listen again, simply press the same key again.
T
O
TELEPHONE
WITH
ONE
-
TOUCH
DIALLING
Do not place the document in the ADF.
- Press the desired numeric key, for example , for more
than one second. The display shows the digits of the tel-
ephone number that you associated with it (see "To set
one-touch and speed dialling", chapter "Basic trans-
mission and reception operations"). If you also associ-
ated a name with it, the display will show this, too.
Once the number has been dialled, if the correspondent is
free, you can start talking. The display shows the length of
the call in minutes and seconds in the top right-hand corner.
NOTe
If you want to activate the "handsfree" function, having raised
the handset, press the
key. The display shows:
REPLACE HANDSET
T
O
TELEPHONE
WITH
SPEED
DIALLING
Do not place the document in the ADF.
Lift the handset to engage the line or press the key to
activate the handsfree function. The display shows:
OFF HOOK
And the length of the call in minutes and seconds in the top
right-hand corner.
The display shows:
TEL CALL
CODE OR < >
- Type the desired speed dialling code, for example .
The display shows the digits of the telephone number that
you associated with it (see "To set one-touch and speed
dialling", chapter "Basic transmission and reception
operations"). If a name was also associated with it, the
display will show this, too.
Once the number has been dialled, if the correspondent is
free, you can start talking.
T
O
TELEPHONE
BY
RUNNING
A
SEARCH
IN
THE
PHONE
BOOK
Do not place the document in the ADF.
Lift the handset to engage the line or press the key to
activate the handsfree function. The display shows:
OFF HOOK
And the length of the call in minutes and seconds in the top
right-hand corner.
The display shows:
TEL CALL
CODE OR < >
/ To locate the telephone number or name of the correspond-
ent you want to call.
To start dialling.
Once the number has been dialled, if the correspondent is
free, you can start talking.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti fax lab 270 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti fax lab 270 in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti fax lab 270

Olivetti fax lab 270 User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info