Manual Olivetti ECR6900 (page 16 of 50) (English)

40148

Zoom out

Zoom in

1/50

Percent Discount (-%) or Add on (+%)

The and keys can be set up to apply a predefined

percentage discount or percentage add on. The rate can be

applied to an individual item or to the sales transaction total.

The procedure for both keys is the same:

1. Control lock key position: PRG.

2. Type the [4-digit number] representing the desired

percentage rate. A value in the range 0 to 99.99 can be

specified. Two digits must be placed before the decimal

point and two must be placed after.

3. Specify whether the rate is a discount or an add on by

entering the appropriate code as indicated below:

0 = Percent add on

1 = Percent discount (default)

4. Enter the [4-digit] percentage rate limit. A value in the

range from 0 to 99.99 can be used. Two digits must be

placed before the decimal point and two must be placed

after. The default is 9999.

NOTE: When the rate limit is set to 0000, it is not possible

to override the predefined rate associated with the key.

5. Press

or to assign the rate and function to the

respective key.

Example: Program the

key with a standard 5.50%

discount and a discount limit of 75%, and the

key

with a standard 10% add on and an add on limit of 90%.

Type/Press:

• Press the letter key on the keypad the number of times

necessary to select the character, as indicated by the

corresponding number on the row at the top of the table.

• Confirm your final caption by pressing

NOTE: Special accented national letters are not displayed.

Example: Select the letters à and Ü.

Type/Press:

Receipt Header and Footer

By default your cash register prints a header on all customer

receipts. It can also print a personalized footer, if you pro-

gram system option 79 accordingly. See section "System

Options" for details.

The default receipt header consists of up to 10 lines of 24

characters each, or 20 lines if you consider the footer as part

of the header. If System Option 79 is set to 1 so that a footer

is printed on the sales receipt, the header and footer will each

consist of 10 lines of 24 characters each with default cap-

tions. You can change the cash register's default header, or

the programmed default footer using the keypad and/or

Character Table to enter the characters you want.

1. Control lock key position: PRG.

2. Press

repeatedly until the message is displayed

indicating the first line of the receipt header, or the first line

of the receipt footer.

3. To jump to a specific header or footer line to personalize,

type the [line number] on the numeric keypad and then

press

4. Enter the letters or characters of the string you wish to

define and then press

. You are now prompted to

personalize the following line.

5. Repeat steps 3 and 4 if you wish to program the remaining

programmable header or footer lines.

6. Press

to exit.

Example: Change the third line of the default header to

SALES ON NOW using the CAPS Character Table.

Type/Press:

Switch to Recipt header

definition mode

Confirm entered

header

Exit

Receipt header

line selection

Units

Decimals

Percent

discount

code

Discount max. limit 75%

Percent

add on

code

Units

Decimals

Add on max limit 90%

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR6900 in the language / languages: English as an attachment in your email.

The manual is 5,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti ECR6900

Olivetti ECR6900 User Manual - German - 52 pages

Olivetti ECR6900 User Manual - Dutch - 51 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olivetti ECR6900 Manual

Product: