16646
32
Zoom out
Zoom in
Previous page
1/65
Next page
25
ENGLISH
Exiting the Calculator Mode
Proceed as follows to exit from the calculator mode:
1. Slide the control switch to the R1 or R2 position.
2. Hold down the [C] key and press the [Amt Tend/TOTAL] key.
3. The decimal point will disappear from the display indicating that you
are now back into the normal register mode.
Assigning the Calculator Mode Password
Proceed as follows to assign a password that prevents unauthorized
access to the functions provided by the calculator mode:
1. Slide the control switch to the PRG position.
2. Type [8], enter the [4-digit number] which will be your calculator
mode password and then press the [RA/
] key.
NOTE: The 4-digit number cannot be 0000.
3. Slide the control switch to the OFF position to exit the PRG mode.
Example: Define calculator mode password 1962.
Type/Press:
[8] + [1962] + [RA/
]
Accessing the Calculator Mode Protected by a
Password
Proceed as follows to access a password protected calculator mode:
1. Slide the control switch to the R1 or R2 position.
2. Enter the four-digit calculator mode password.
3. Hold down the [C] key and press the [Amt Tend/TOTAL] key.
4. A decimal point will appear on the display indicating that the calculator
mode is in operation.
The Non-Print Mode
This cash register model can be programmed to be in the non-print
mode. This mode will stop the printing of sales transactions in the R2
(Receipt) mode. While in the non-print mode, the sales totals will be
maintained and the management reports will print. This feature is useful
for those times when a receipt tape is not required yet you need to keep
track of sales totals.
Activating the Non-Print Mode
Proceed as follows to activate the non-print mode:
1. Slide the control switch to the PRG position.
2. If a security code has been assigned, enter this code and then press the
[Charge] key.
3. Type [6] followed by [1], and then press the [RA/ ] key. The
non-print mode is now activated and no printing will occur in the R2
mode.
4. Continue with other programming or slide the control switch to another
position.
Turning Off the Non-Print Mode
Proceed as follows to deactivate the non-print mode:
1. Slide the control switch to the PRG position.
2. If a security code has been assigned, enter this code and then press the
[Charge] key.
3. Type [6] followed by [0], and then press the [RA/
] key. The
non-print mode is now turned off and printing will occur in the R2
mode.
4. Continue with other programming or slide the control switch to another
position.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR5200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR5200 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti ECR5200

Olivetti ECR5200 User Manual - German - 72 pages

Olivetti ECR5200 User Manual - French - 70 pages

Olivetti ECR5200 User Manual - Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info