16646
28
Zoom out
Zoom in
Previous page
1/65
Next page
21
ENGLISH
Euro Exchange Rate Programming
You can program the Euro exchange rate so that the cash register can
automatically calculate the transaction from your local currency into Euro
and vice versa depending on the cash register's base currency (Local or
Euro). The cash register is programmed by default so that your local
currency is the base currency. If you wish to change the base currency to
Euro, refer to the "Programming System Options" section in this manual,
Machine Condition 14.
Programming the Euro Exchange Rate
Euro exchange rate programming consists of firstly defining the position
of the decimal point of the Euro exchange rate (0-8 digits after the decimal
point), the position for the decimal point of the changed amount which is
also printed on the sales receipt (0-3 digits after the decimal point), and
then the actual current exchange rate (up to 6 digits). To provide you with
the Euro value, the cash register divides the local currency value by the
exchange rate defined.
Proceed as follows to program or update the exchange rate of your local
currency into Euro:
1. Slide the control switch to the PRG position.
2. Type the [decimal point position] of the exchange rate (0-8 digits
after the decimal point).
3. Type the [decimal point position] of the converted amount (0-3 digits
after the decimal point).
4. Type the [exchange rate] using up to six digits without specifying any
decimal point.
5. Press the [Sub Total] key to store the exchange rate.
Example: Program an exchange rate of £ 0.63 to the Euro.
Type/Press:
[2] + [2] + [000063] + [Sub Total]
Programming System Options
Your cash register's system options programming feature includes 14
options for the operation of the cash register. Each of the functions
described in this section is already set upon delivery of the cash register to
meet the most frequent requirements. The cash register's factory default
settings, which you can reprogram at any time, are indicated in bold print in
the table below.
Machine Settings
Condition
1 0 = No digit after the decimal point
1 = 1 digit after the decimal point
2 = 2 digits after the decimal point
3 = 3 digits after the decimal point
2 N/A
3 0 = Preset USA tax mode
1 = Preset Canadian tax mode
2 = Preset VAT mode
4 0 = Time display and print in the 24-hour format
1 = Time display and print in the 12-hour format
5 0 = Setting of non-taxable limit without GST TAX for
Canadian tax mode
1 = Setting of non-taxable limit with GST TAX for Canadian tax
mode
6 0 = REG 2 print mode activated
1 = REG 2 print mode deactivated (no printing)
7 0 = Date set in the Month/Day/Year format
1 = Date set in the Day/Month/Year format
8 N/A
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR5200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR5200 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti ECR5200

Olivetti ECR5200 User Manual - German - 72 pages

Olivetti ECR5200 User Manual - French - 70 pages

Olivetti ECR5200 User Manual - Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info