42378
22
Zoom out
Zoom in
Previous page
1/82
Next page
15
ENGLISH
Training Mode
The optional training mode is designed to help you become better
acquainted with the register mode and offers an ideal place for begin-
ners to practice transaction examples. Once the training mode is
activated, you cannot operate in the PRG, X or Z modes. The transac-
tions made in the training mode are not recorded in the X or Z reports
and are not summed to machine totals. Receipt numbers are not
counted either.
Activating the Training Mode
Proceed as follows to switch the cash register into the training mode:
1. Turn the PRG control key to the PRG position.
2. Type [666666] and press the [Amt Tend/TOTAL] key. A dot
indicating the Training Mode On condition is displayed on the left-
hand side of the operator and customer displays.
3. Turn the key to the REG position to perform normal cash register
operations.
Exiting the Training Mode
Proceed as follows to exit the training mode and therefore re-enable
the cash register to record all sales transactions in the X and Z manage-
ment reports and in the machine totals.
1. Turn the PRG control key to the PRG position.
2. Type [555555] and press the [Amt Tend/TOTAL] key.
3. Turn the key to the desired operating position.
Cash Register Programming
This cash register can be programmed to tailor its features according
to your specific needs. This programming facility allows you to:
Define three-digit secret codes for each of the 15 programmable
clerks
Set a machine number
Set the date and time
Set percent discount (-%) rates
Set percent plus (+%) rates
Define fraction rounding
Define decimal point positions
Define up to four VAT rates
Define Price Look-Ups (PLUs) for individual items
Define tax status and High Digit Lock Out to the minus key
Define tax status, High Digit Lock Out, Positive/Negative Single/
Multiple item sale and relative price to a defined and activated
department
Define a normal department for negative price registrations
Set an exchange rate for the Euro currency
Program time reports
Program the different system options available
Define manager passwords for the PRG, X and Z modes.
Set some of or all of the above features, depending on your business
needs. These program settings will reside in the cash register's memory
until you change them or deactivate the battery back-up system.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR2350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR2350 in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info