42378
13
Zoom out
Zoom in
Previous page
1/82
Next page
6
21.[Subtotal w/Tax] - Displays the subtotal of a sale with sales tax.
22.[Euro] - When the cash register is in its default Local base cur-
rency, this key is used to program the Euro exchange rate and to
automatically calculate and display the value in Euro of the total
amount of a sale or of a particular amount registered. When the cash
register is programmed to work in the Euro base currency, pressing
this key converts the sales total to the Local currency.
23.[Amt Tend/TOTAL] (Amount Tendered/TOTAL) - Totals exact
cash transactions, computes change and totals check and charge
transactions.
The Control System
The Control Lock
The control lock is located on the upper left-hand side of the keypad.
The PRG or REG key must be properly inserted in the Control Lock in
order for you to be able to use the different cash register functions
available. The following figure shows the Control Lock and the
different modes that can be used.
Depending on the desired operation, insert the appropriate key in the
Control Lock and turn it to the following positions:
OFF The cash register is turned off and cannot be used.
PRG Used to program the cash register according to your
specific needs.
REG The cash register can perform the standard sales transac-
tions, including preset options.
X Prints the X management report, Cash-in-Drawer report,
PLU report, clerk report, cash declaration and periodical
financial reports.
Z Prints the Z management report and resets totals (except
the grand total) to zero. Prints the PLU report, clerk
report, cash declaration and periodical financial reports.
Control Keys
A set of each of the following keys is provided along with a set of
keys to open the cash drawer and printer compartment:
PRG The PROGRAM key works in all modes (PRG, REG, X
and Z). It is usually used by the Supervisor to program the
cash register, access cash register functions and print X
and Z management reports.
REG The REGISTER key only works in the REG and X modes,
granting both Clerk and Supervisor access to the cash
register functions. This key cannot be used to access the
PRG and Z modes.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR2350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR2350 in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info