653708
16
Zoom out
Zoom in
Previous page
1/80
Next page
2
CASH REGISTER COMPONENTS
With reference to figures 1 and 2:
1. RJ45/USB cable for connecting a PC or barcode
reader to the cash register.
2. Customer display.
3. Operator display.
4. Keypad.
5. Cash drawer and box.
6. Cash drawer lock and slot.
7. Item deposit drawer.
8. Power cord.
9. Storage Device (SD) - under printer compartment
cover.
10. Printer compartment cover with receipt output
window.
11. RJ45 interface for connecting, using the RJ45/USB
cable provided, a computer for cash register
programming. See the note below.
12.
RJ45 interface for connecting, a barcode reader to the
cash register.
NOTE: From the company website you can
download the software needed to
program the cash register directly from
your computer.
REMOVABLE CASH DRAWER AND BOX
With reference to figure 4, the cash drawer has slots for
banknotes and for coins. The drawer can be opened by
pressing ,
or by sliding the hidden emergency
button underneath the register. If required, the cash
drawer or the whole drawer box can be removed. To
remove the cash drawer box, with reference to the
figures, extract the drawer (8) and undo the screws
underneath (9). Raise gently the register and unplug the
signal cable (10) so that the box comes free. To
assemble the box and register again, perform the same
procedure but in reverse order.
On the front of the drawer there is a slot for quickly
storing checks, coupons and so on.
INSERTING MEMORY CARD STORAGE
DEVICE
To insert a memory storage device, with reference to
figure 5, lift the slot cover and insert the card, orienting
it as shown.
OPERATOR AND CUSTOMER DISPLAYS
The operator LCD display has a Menu system providing
access to all cash register functions. You can raise and
tilt the display to obtain the most comfortable viewing
position. The pop-up, single-line, customer display can
be raised and swivelled to obtain the most favorable
position for customer viewing. When sales transaction
data is not displayed, scrolling messages can be
programmed to appear according to the cash register
state (idle, off and so on).
SWITCHING THE OPERATOR DISPLAY ON
To switch on the operator display press the key
on the keypad. The Main menu is displayed from which
you can select:
Registration mode
- to enter sales transactions as a
clerk (also in training mode)
Manager mode
- to enter all sales transactions as a
Manager (also in training mode)
X1 & X2 Report mode
- to print X financial reports
Z1 & Z2 Report mode
- to print Z financial reports
Programming Mode
- to set up the cash register
and program sales functions
Off mode
- to switch off the menus and the operator
display.
See “Using the Menus” for how to navigate the menus.
NOTE: The first time you switch on the cash
register, it must be initialized (see “Quick
Start Programming”).
SWITCHING THE OPERATOR DISPLAY OFF
To switch off the operator display, first terminate any
sales transactions, then:
1. Press to display the Main menu.
2. Use to scroll to the option Off Mode.
3. Press .
The cash register is switched off. A scrolling message
appears on the customer display, if programmed.
SYMBOLS AND MESSAGES
The Operator Display (OD) and Customer Display (CD)
symbols and messages can be understood as follows
(refer to figures 6 and 7 respectively):
REGISTRATION MODE
O.D. Ref. C.D. Meaning
(2) n/a
Training
mode.
(4) n/a Hold mode - A transaction has
been temporarily put on hold.
(4) n/a
Recall mode - A transaction on Hold
has been recalled for completion.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR 8220 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR 8220 S in the language / languages: English as an attachment in your email.

The manual is 4,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info