460791
19
Zoom out
Zoom in
Previous page
1/38
Next page
11
ENGLISH
Entering the Calculator Mode
1. Control key position: REG or JRNL.
2. Type the [four-digit password] and press
.
3. A line will appear on the far left-hand side of the display
indicating that the calculator mode is in operation.
Exiting the Calculator Mode
1. Control key position: REG or JRNL.
2. Press
.
3. The line will disappear from the display indicating that
you are now back into the normal register mode.
Programming a Calculator Mode Password
1. Control key position: PRG.
2. Press
.
3. Type the [4-digit password] and press .
NOTE: The 4-digit password cannot be 0000.
Example: Define calculator mode password 1962.
Type/Press:
Clerk System
The Clerk System is a security feature that enables you to
control access to the cash register and monitor the number
of transactions and the sales of up to 8 Clerks.
Your cash register is configured at the factory with the
Clerk System deactivated. You can activate the Clerk
System for a degree of protection and sales monitoring or
deactivate it again so that the cash register can be used
freely without restrictions.
NOTE: If the Clerk System is deactivated, the cash register
is used without needing to enter a Clerk number only or a
Clerk number and its related 3-digit security code.
You can also program other clerk-related features. See
"System Options", Machine conditions 9 and 10 for details.
Activating the Clerk System
1. Control key position: PRG.
2. Press .
Deactivating the Clerk System
1. Control key position: PRG.
2. Press
.
Programming a Secret Code Linked to a Clerk
Number
With the Clerk System active:
1. Control key position: PRG.
2. Type a number from
to to identify the clerk
which the secret code will be linked.
3. Press
.
4. Define if the clerk is a normal or training clerk by typing
the related code indicated below:
0 = Normal clerk
1 = Training clerk
5. Press
.
6. Define a three-digit secret code by typing three [numeric
keys].
7. Press
.
Example: Assign secret code 106 to a normal Clerk 1.
Type/Press:
Entering a Clerk Number/Secret Code Before
Cash Register Operations
1. Control key position: REG or JRNL.
2. Type a Clerk number
to and press .
3. Type the corresponding three-digit code (if
programmed) and press
.
The clerk number is displayed (C1 .....C8) to identify the
clerk that is in use and that it is now possible to carry out
transactions. The clerk number is printed on the sales
receipt and on the management reports.
Calculator password defined
Confirm
password
Switch to Calculator mode
password definition
Secret code
Clerk number
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR 7700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR 7700 in the language / languages: English as an attachment in your email.

The manual is 4,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti ECR 7700

Olivetti ECR 7700 User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info