452052

Olivetti ECR 6700 Manual

25
Zoom out
Zoom in
Previous page
1/36
Next page
17
ENGLISH
Cash Register Programming Report
This report provides a printout showing how your cash
register is programmed. It lists the values that are
programmed for all system options, the VAT rates, foreign
currency exchange rates and percent minus value
programmed, the manager password and training mode
password assigned, and the three-digit security code
assigned to the clerk.
1. Control key position: PRG
2. Press
.
Training Report
This report provides an X or Z report of the transactions
performed in the training mode. Like the ordinary X and Z
financial reports, a Z report resets all transaction totals to
zero and provides the same information as an ordinary X or
Z financial report with the exception that the report identifier
is "X0" or "Z0".
1. Control key position: X1/X2 or Z1/Z2. Bear in mind that in
the Z position the training report contents are cleared.
2. Press
.
Electronic Journal Reports
An electronic journal report executed with the control key in
the X1/X2 position does not clear the electronic journal
memory (and therefore all transaction data are retained)
while the report executed with the control key in the
Z1/Z2 position cancels electronic journal memory thus
restoring it to its maximum line capacity programmed.
To momentarily interrupt report printing, press
. Press
this key again to resume printing.
To cancel report printing, press
.
Complete Electronic Journal Report
This report is a complete listing of transaction receipts and Z
financial reports taken within the maximum line capacity
programmed.
1. Control key position: X1/X2 or Z1/Z2. Bear in mind that in
the Z position the electronic journal memory contents are
cleared after you press . Make sure there is plenty
of paper loaded in the printer.
2. If a manager password was defined type the
[4-digit password] and press .
3. Press
.
When the contents of the electronic journal are printed, a
message is displayed along with a beep to indicate that the
EJ memory capacity has been restored to its programmed
line capacity.
Oldest Transaction Report
By entering the number of transactions you wish to view, this
report prints the selected number of oldest receipts and Z
financial reports performed and stored within the programmed
line capacity.
1. Control key position: X1/X2 or Z1/Z2. Bear in mind that in
the Z position the journal report contents are cleared.
Make sure there is plenty of paper loaded in the printer.
2. If a manager password was defined type the
[4-digit password] and press
.
3. Type a number between [001 and 999] indicating the
number of oldest reports wanted and press
.
Latest Transaction Report
By entering the number of transactions you wish to view, this
report prints the most recent receipts and Z financial reports
performed and stored within the programmed line capacity.
1. Control key position: X1/X2 or Z1/Z2. Bear in mind that
in the Z position the journal report contents are cleared.
Make sure there is plenty of paper loaded in the printer.
2. If a manager password was defined type the
[4-digit password] and press
.
3. Type a number between [001 and 999] indicating the
number of latest reports wanted and press
.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR 6700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR 6700 in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti ECR 6700

Olivetti ECR 6700 User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info