452052

Olivetti ECR 6700 Manual

14
Zoom out
Zoom in
Previous page
1/36
Next page
6
Example: Program a multiple positive item sale, VAT 2 and
a price of £2.50 to an item in Department 2.
Type/Press:
After you have programmed your departments, you can print
a report that indicates the programmed values. See section
"Department Programming Report" for details.
6. Program a Fixed Price Look-Up (PLU)
Up to 400 PLUs can be programmed.
1. Control key position: PRG
2. Press
, type the [PLU number (between 1 and
400)] and then press
.
3. Type the [unit price] that you wish to assign to the PLU.
4. Press the related department
to key
to assign the PLU to a Department from 1 to 14. If tax is
required for a particular PLU item, be sure to link the PLU
number related to the item to a department that is
programmed for tax. To program a department for tax,
refer to the section Link a Multiple/Single Item Sale, Tax
Status and Item Price to a Department.
5. Press
.
Example: Create PLU 1 with a unit price of £2.69
assigned to Department 3.
Type/Press:
After you have programmed your PLU items, you can print a
report that indicates the programmed values. See section
"PLU Programming Report" for details.
Multiple positive
item sales
Tax status
Unit price
Department
PLU number
PLU price
Department
Cash Register Programming and
Features
Programs and transaction information for management reports
are stored in the memory of the cash register which is
protected by back-up batteries.
Before beginning to program the cash register or to
perform sales transactions, insert the batteries to save
this information if a power failure occurs or if you
unplug the cash register from the power outlet.
Making Changes to Cash Register
Programming
If you wish to make a change to your initial programming
(such as an update to VAT rates, PLUs or exchange rates):
• Turn the control key to the PRG position.
• Re-do the program in question and confirm as explained
in the next sections
• Turn the control key to another operating mode.
A new program entry will automatically overwrite a previous
entry for the same program.
Caption Programming using the
Alphanumeric Keypad and Character
Table
To program customer receipt headers and courtesy
messages, PLU product names, department names, clerk
names and foreign currency descriptors you can use just the
alphanumeric part of the keypad to enter non-accented
capital letters and the Character Table to enter small letters,
accented capital and small letters, special characters or
symbols. The following captions can be programmed:
• Up to 400 PLU item names of a maximum 12 characters
each
• Up to 14 department names of a maximum 12 characters
each
• Up to 8 clerk names of a maximum 12 characters each
• Receipt headers of up to 6 lines of a maximum 24 characters
each
• Receipt footers of up to 4 lines of a maximum 24 characters
each
• Up to 4 foreign currency identifiers of a maximum 10
characters each.
Using the Keypad
To use the alphanumeric keypad to enter capital caption
letters, locate the letter wanted and press its associated
alphanumeric key the number of times needed to display it
(the letter will be displayed on the far right-hand side of the
display).
• If the same alphanumeric key has to be used for successive
letters of a caption, press
between the two letters.
• Press
if you want to add spaces.
• Any incorrect letter can be canceled by pressing
that provides the typcal backspace function available in
the PC environment.
• Confirm your final caption by pressing .
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR 6700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR 6700 in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti ECR 6700

Olivetti ECR 6700 User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info