452059

Olivetti ECR 2450T Manual

68
Zoom out
Zoom in
Previous page
1/81
Next page
60
ENGLISH
Management Reports
Transaction data is maintained in the memory of the cash register as
long as the battery back-up system is in effect. This data can be printed
as a report for management review. The Management Report can be
printed from either the X and Z position on the control lock.
X and Z Reports
Turning the PRG, REG or Z key to the X position prints the accumu-
lated transaction information and RETAINS ALL TOTALS IN
MEMORY. Use this report mode to print periodic reading of the
transactions performed. X reports include the Cash-In-Drawer, PLU
Report, Time Report and X1 and X2 Financial Reports.
Turning the PRG or Z key to the Z position prints the same informa-
tion as the X reports. The only difference between the two types of
report is, however, that after a Z report printout ALL TRANSAC-
TION TOTALS ARE RESET TO ZERO, except for the grand total
unless otherwise programmed in the system options programming
mode. Z1 and Z2 Financial Reports are provided.
An X1 Report can be printed at any time of the day. This report gives
you all the sales transaction totals made before the report is issued. The
Grand Total value at the bottom of this report shows the total sales up
to the previous day, if a Z1 report was previously taken (this GT does
not, however, include the current day’s totals).
A Z1 Report gives the same information as an X1 Report but then
resets the transaction totals to zero once printed. It is usually taken at
the end of the day so that all the transaction totals are cleared to start
from zero the following day. After a Z1 Report, the transaction totals
are transferred to the Grand Total (GT) value of the X1 Report. Only
when a Z1 Report is taken are the transaction totals transferred to the
Z2 or X2 reports.
A Z2 Report is also called a period-to-date financial report which
also clears the transaction totals from memory once issued.
This report is usually taken at the end of the month, for example, if a
monthly sales report is desired to check the activities of each single
department.
An X2 Report gives the same period-to-date financial report as a Z2
Report but does not reset the totals to zero. This report can be taken at
any time.
Cash-In-Drawer Report
The cash-in-drawer report tells you how much cash is in the cash
drawer.
Proceed as follows to print a cash-in-drawer report:
1. Turn the control key to the X position.
2. Type the manager password if it has been defined.
3. Press the [Qty/Date] key.
Total cash in drawer
in local currency
Acronym for
Cash In Drawer
… 68 …


Need help? Post your question in this forum.

Forumrules
1

Forum

olivetti-ecr-2450t

Reset search

  • How do I delete a over ring of £700 on a Olivetti register till?
    Submitted on 23-4-2022 at 18:01

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR 2450T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR 2450T in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info