452059

Olivetti ECR 2450T Manual

39
Zoom out
Zoom in
Previous page
1/81
Next page
31
ENGLISH
Transaction Examples
This section provides examples on how to complete different types of
transactions. Sample receipts are included which reflect some of the
programming examples used in the chapter entitled Cash Register
Programming.
Entering the Register Mode
The cash register has two register modes which can be used to record
ordinary sales transactions. These two modes are called REG 1 and
REG 2, where the only difference between the two is that in the REG 1
mode the cash register will automatically print the programmed header
on all customer receipts and journal records, while in the REG 2 mode
this header is not printed at all.
Proceed as follows to enter the register mode, assuming that you wish
to have the cash register print the programmed header:
1. Insert the REG key into the Control Lock and turn it to the REG 1
position.
2. If the Clerk System option was set to active as explained in the
section entitled Clerk Numbers, Secret Codes and Names, enter the
related Clerk number assigned and its associated three-digit secret
code. If the Clerk System option was set to active and a secret code
was not programmed, type any Clerk number [1-26] and then press
the [Clerk] key.
Example: Define manager password 7654 for the X mode.
Type/Press:
[222222] + [Amt Tend/TOTAL] + [7654] + [Non Tax]
Using the Cash Register in a Password Protected
Mode
If a manager password was defined to protect unauthorized access to
the PRG, Z and X machine modes, proceed as follows to enter the
specific passwords so that you can work normally in these modes:
1. Turn the PRG key to the PRG, X or Z position.
2. Type the specific 4-digit password that grants you access to the
required mode.
3. Press the [Check] key.
NOTE: If you attempt to use a protected machine mode without typing
the correct password, the cash register emits an error signal
and the message "SEC CODE" appears on the operator
display.
… 39 …


Need help? Post your question in this forum.

Forumrules
1

Forum

olivetti-ecr-2450t

Reset search

  • How do I delete a over ring of £700 on a Olivetti register till?
    Submitted on 23-4-2022 at 18:01

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR 2450T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR 2450T in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info