452059

Olivetti ECR 2450T Manual

33
Zoom out
Zoom in
Previous page
1/81
Next page
25
ENGLISH
Programming the Euro Exchange Rate
Euro exchange rate programming consists of firstly defining the
position of the decimal point of the Euro exchange rate (0-8 digits after
the decimal point), the position for the decimal point of the changed
amount which is also printed on the sales receipt (0-3 digits after the
decimal point), and then the actual current exchange rate (up to 6
digits). To provide you with the Euro currency value, the cash register
divides the local currency value by the exchange rate defined.
Proceed as follows to program or update the exchange rate of your
local currency into Euro:
1. Turn the PRG key to the PRG position.
2. Type the [decimal point position] of the exchange rate (0-8 digits
after the decimal point).
3. Type the [decimal point position] of the converted amount (0-3
digits after the decimal point).
4. Type the [exchange rate] using up to six digits without specifying
any decimal point.
5. Press the [Euro] key to store the exchange rate. The rate entered is
automatically printed along with the caption "EURO".
Example: Program an exchange rate of £ 0.63 to the Euro.
Type/Press:
[2] + [2] + [000063] + [Euro]
Changing the Convert Captions Printed on the Sales
Receipt
By default the cash register prints one of two programmable convert
captions to indicate a converted sales transaction total on the receipt; if
the cash register is programmed with a Local base currency, the convert
caption printed is "EURO" while if it is programmed with a Euro base
currency, the convert caption printed is "LOCAL". If an exchange rate
has been defined, the amounts indicated in both cases are the sales
totals converted into the respective currency. If an exchange rate has not
been defined, by default the cash register assumes a 1:1 conversion
rate.
If you wish to avoid printing the Local or Euro converted sales total
and just print the transaction total of the base currency, program the
cash register to do so as indicated in the section entitled Programming
System Options, Machine Condition 30.
If you have programmed the cash register for a Euro base currency,
proceed as follows to change the LOCAL caption printed:
1. Turn the PRG key to the PRG position.
2. Type [41] and then press the [Return] key. The caption "LOCAL"
appears on the operator display.
3. With reference to the Character Code Table in the Appendix or by
using the alphanumeric keypad, define the new caption (max 10
characters, spaces included).
4. Press the [Check] key to confirm the new caption which is auto-
matically printed.
Example: Change the caption LOCAL to UK POUNDS by using the
alphanumeric keypad.
Type/Press:
[41] + [Return] + [Dept Shift] [Dept. 1/21] + [Dept. 11/31] + [00] +
[Dept. 16/36] + [Dept. 15/35] + [Dept Shift ] + [Dept. 1/21] + [Dept.
14/34] + [Dept. 4/24] + [Dept. 19/39] + [Check]
… 33 …


Need help? Post your question in this forum.

Forumrules
1

Forum

olivetti-ecr-2450t

Reset search

  • How do I delete a over ring of £700 on a Olivetti register till?
    Submitted on 23-4-2022 at 18:01

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR 2450T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR 2450T in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info