Manual Olivetti ECR 2450T (page 24 of 81) (English)

452059

Zoom out

Zoom in

1/81

ENGLISH

Setting Cash Register Features

All cash register features are programmed by first switching the

cash register into the program (PRG) mode.

This chapter provides simple step-by-step procedures on how to

program the cash register. An example is provided after each procedure.

It is suggested that you first run through all the examples to become

familiar with the cash register's programming facilities, then program

the cash register according to your own specific needs.

NOTE: Program all the desired features at the same time in order to

create a single receipt of all selections. Keep the receipt in a

safe place for future reference.

Making Changes to Cash Register Programming

Once the cash register is programmed to satisfy your specific needs,

there is no need to reprogram the entire machine to make single

program changes or corrections. If you wish to make a change (such as

an update to VAT rates, PLUs or Euro exchange rates), be sure you are

in the program mode, re-do the program in question and finalize when

you are ready to exit the programming mode. A new program entry will

automatically overwrite a previous entry for the same program.

Entering the Program Mode

To enter into the program mode simply insert the PRG key into the

Control Lock and turn it to the PRG position.

Exiting the Program Mode

Proceed as follows to exit the program mode once you have finished

programming the cash register:

1. Print a Program Tape by pressing [999999] followed by the

[Amt Tend/TOTAL] key, as explained in the section entitled

Overall Programming Dump Report, for a printed report on how the

cash register is currently programmed.

2. Store the program tape in a safe place for future reference.

3. Turn the PRG key to the REG position if you wish to carry out sales

transactions, or to the OFF position if you wish to exit.

Clearing Errors

To clear an error made during the programming phase, simply press

the [Clear] key. The error tone ends, the display clears and the keypad

unlocks.

In case an error condition cannot be cleared, perform one of the two

general clearance methods explained in the section entitled General

Clearance. Remember that the second general clearance sets all

counters and totals to zero, and cancels all features programmed.

How do I delete a over ring of £700 on a Olivetti register till?
Submitted on 23-4-2022 at 18:01
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR 2450T in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olivetti ECR 2450T Manual

Product: