Manual Olivetti ECR 2450T (page 11 of 81) (English)

452059

Zoom out

Zoom in

1/81

ENGLISH

Unpacking and Setting Up the Cash Register

NOTE: Please read this section carefully before attempting to program

the cash register or perform sales transactions.

As soon as you receive the cash register, open its shipping carton and

carefully withdraw each component. Make sure that the cash register

and all of its accessories, listed in the section entitled Standard

Accessories, are present in order to setup the cash register by following

these guidelines:

1. Place the cash register on a level, stable, vibration-free and dust-

free surface. Make sure that it is near a grounded power outlet.

2. Plug the cash register into a grounded power outlet.

3. Insert the batteries as explained in the section entitied Inserting/

Replacing Batteries. Do not insert the batteries unless the cash

WARNING: Before inserting the memory backup batteries, make

sure that the cash register is plugged into an electrical

power outlet. The machine must be plugged into an

electrical outlet before you insert the batteries.

4. Load the thermal paper roll as explained in the section entitled

Loading Thermal Paper.

5. Set the desired program options as explained in the section Cash

6. Once the desired program options have been set, turn the control

key to the REG 1 or REG 2 position and you are ready to perform

sales transactions. In the REG 2 position the cash register will not

print the programmed receipt header.

Maintaining the Cash Register

Provided below is information on how to maintain your cash register.

NOTE: Before cleaning the cash register, make sure it is powered off

and/or unplugged from the wall outlet. Before unplugging the

cash register from the wall outlet, make sure that four charged

AA standard backup batteries are installed in the battery

compartment. All data stored in memory will be cancelled if

you unplug the cash register from the electrical wall outlet

without back-up battery supply.

1. Keep all liquids away from the cash register so as to avoid spills

which could damage the electronic components.

2. To clean the cash register firstly turn it off and/or unplug it from the

wall outlet (be sure the back-up batteries are installed), then use

just a damp cloth. Do not use corrosive substances such as solvents,

alcohol, petrol, or abrasive components.

3. If the cash register is stored in extreme hot or cold temperatures

(below 32 degrees or above 104 degrees Fahrenheit), allow the

temperature inside the cash register to reach room temperature

before turning it on.

4. DO NOT attempt to pull the paper tape when the cash register is

printing or when you are loading paper. Always use the [Feed] key

to feed paper. Pulling the paper tape could damage the print

mechanism.

How do I delete a over ring of £700 on a Olivetti register till?
Submitted on 23-4-2022 at 18:01
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR 2450T in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olivetti ECR 2450T Manual

Product: