436314
59
Zoom out
Zoom in
Previous page
1/82
Next page
55
6
INDICATORS AND DISPLAY MESSAGES
If one of the following indicators lights up or one of the following messages appears in the display, check the
meaning of the indicator or message in the following table and take appropriate action.
Indication Cause and solution Page
Maintenance
indicator
Steadily
lit
Service by an authorised OLIVETTI service technician is
required.
Developer
replacement
required indicator
Steadily
lit
Developer is required. Contact your authorised service
representative.
Toner cartridge
replacement
required indicator
Steadily
lit
Replacement of toner cartridge will be needed soon.
Prepare a new cartridge.
Blinking
Toner cartridge must be replaced. Replace it with a new one.
63
Paper required
indicator
Steadily
lit
The tray is out of paper. Load paper. It is also possible that
the tray is not inserted completely into the machine. Make
sure it is inserted correctly.
14
Misfeed indicator Blinking
A paper misfeed has occurred. Remove the misfeed as
explained in "MISFEED REMOVAL".
56
ORIGINAL SIZE indicator Blinking
The original is not placed in the correct orientation. Rotate
the original so that it is in the same orientation as the
blinking ORIGINAL SIZE indicator.
18,19
PAPER SIZE indicator Blinking
A blinking PAPER SIZE indicator means that the size of paper
loaded in the tray is different from the paper size setting for the tray.
Change the paper size setting.
To clear the display, do one of the following:
Use the [TRAY SELECT] key ( ) to change the tray selection.
Open and close the tray.
Press the [CLEAR ALL] key ( ).
16
[CH] appears in display
Steadily
lit
The front cover or the side cover is open. Close the front
cover or the side cover.
Blinking
The toner cartridge is not installed correctly. Reinstall the
toner cartridge. If [CH] still blinks in the display after
reinstalling the toner cartridge, contact your authorised
service representative.
63
Letters and numbers appear
in the display
Turn off the power switch, wait about 10 seconds, and then turn
on the switch again. If this does not clear the message, write
down the code that appears and then unplug the power cord
and contact your authorised service representative. Tell your
authorised service representative what code appeared and the
circumstances under which it appeared.
"FUL" appears in the display
Data is being held in memory. Print the data or clear it from
memory.
30, 32
When "Use close paper size" is disabled
Press the [TRAY SELECT] key ( ) to manually select the
tray and then press the [ON LINE] key ( ). Printing will
begin. If you are selecting the bypass tray, load paper in the
bypass tray.
Online
manual
Misfeed location indicator lights up at
the optional 2 x 250-sheet/250-sheet
paper feed unit
The side cover of the 2 x 250-sheet/250-sheet paper feed
unit is open. Close the side cover.
Misfeed indicator
Paper required indicator
Maintenance indicator
Toner cartridge replacement
required indicator
Developer replacement required indicator
Display
A3
A4
A4
A5
B4
EXTRA
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti d copia 2001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti d copia 2001 in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info