436314

Olivetti d copia 2001 Manual

34
Zoom out
Zoom in
Previous page
1/82
Next page
30
CONVENIENT COPY FUNCTIONS
Using the document glass
1
Place the first original. (p.18)
2
Select the original size. (p.18)
3
Press the [SORT/GROUP] key
( / ) to select the desired mode.
The modes are selected
in the order "SORT"
( ), "GROUP"
( ), "Off".
4
Set the number of copies and other
settings, and then press the [START]
key ( ).
The ORIGINAL DATA indicator ( ) blinks,
and the original is scanned into memory.
5
When the start indicator lights,
replace the original with the next
original, and then press the [START]
key ( ).
Repeat step 5 until all originals have been
scanned into memory.
6
When all originals have been
scanned, and then press the
[READ-END] key ( ).
The copies are delivered to the paper output tray.
Using the SPF
1
Place the originals. (p.19)
Sort mode is normally the default output mode,
and thus the SPF and SORT indicators light up.
2
Press the [SORT/GROUP] key
( / ) to select the desired mode.
The modes are selected
in the order
"SORT"( ),
"GROUP" ( ), "Off".
3
Set the number of copies and other settings,
and then press the [START] key ( ).
The copies are delivered to the paper output tray.
If the memory becomes full
• If the memory becomes full while scanning the
originals, the ORIGINAL DATA indicator ( )
will blink, "FUL" will appear in the display, and the
machine will stop copying.
• To copy the originals that have been scanned up
to that point, press the
[START] key ( )
.
• To clear the data that has been scanned into
memory, press the [CLEAR ALL] key ( ) or the
[CLEAR] key ( ).
If the paper output tray becomes full
When the maximum number of pages (about 250
pages) that can be held in the paper output tray are
output, copying will temporarily stop. When this
happens, promptly remove the copies and press the
[START] key ( ) to resume copying.
Offset function during Sort/Group copy
The offset function shifts the position of each set or group
of copies in the paper output tray for easy separation.
The offset function setting can be changed in the user
programs. (p.41)
To clear the data in memory, press the
[CLEAR] key
().
• To cancel the Sort/Group copy job, press
the [CLEAR] key
().
• To cancel Sort or Group mode, press the
[SORT/GROUP] key ( / )
repeatedly until the SORT/GROUP
indicators ( / ) are both off.
DATA
Note
Note
• If "Sort auto select" has been set to "1:
OFF" in the user programs, follow the steps
below to select sort mode.
• "Sort auto select" can also be used to
change the default output mode (p.42).
• To cancel the Sort/Group copy job, press
the [CLEAR] key ().
• To cancel Sort or Group mode, press the
[SORT/GROUP] key ( / )
repeatedly until the SORT/GROUP
indicators are ( / ) both off.
Note
Note
DATA
1
1
1
2
1
2
3
1
1
1
2
3
Offset function
When offset function is disabled
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti d copia 2001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti d copia 2001 in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info