588296
37
Zoom out
Zoom in
Previous page
1/92
Next page
37
ENGLISH
UNICO
mode, the onboard microprocessor adjusts the automatic speed. The higher the difference between the room temperature detected
and the temperature set, the higher the speed.
As the room temperature nears the setting, fan speed is reduced automatically.
In dehumidification mode, it is not possible to control the speed as the appliance can only operate exclusively at low speed.
3.3.11 Night well-being key
Press the T3 button (night well-being) to obtain several results, specifically:
- Gradual increase of the set cooling temperature.
- Gradual decrease of the temperature set for heating (only HP models).
- Decrease of the unit's noise level.
- Savings on night-time consumption of electricity.
In order to activate the Night well-being key press button T3 press after having selected the required operating
mode through button T4 and having set the required temperature through button T7.
Ideally, you should start night well-being mode operation just before you fall asleep.
In cooling, the set temperature is maintained for one hour after activating the night-time comfort button. During the next two hours
the setting increases gradually, whilst the running of the fan is set to low speed. After the second hour, the temperature and fan
speed settings do not change any longer.
In heating mode, the set temperature is held for one hour after starting Night well-being mode operation.
During the next two hours the setting decreases gradually, whilst the running of the fan is set to low speed.
After the second hour, the temperature and fan speed settings do not change any longer.
The 'night well-being' key is not available when the unit operates in dehumidification and ventilation mode.
The night well-being mode button may be disabled at any time (ideally when you wake up in the morning) by pressing button T3
again.
At this stage the temperature and fan speed settings made prior to starting Night well-being mode operation go back into effect.
3.3.12 Setting the operating programs
The air conditioner logic provides the user with a choice of two operating programs that can be set to start and stop at programmed
times, for example you might want the air conditioner to start shortly before you return home so that it is cool when you get there.
To use these functions it is first necessary to set the exact time on the remote control and then set the time for the programs to
start.
3.3.13 Setting the exact time
Proceed as follows to set the exact time:
a) Press button T6 (Time and Program Setting), as many times as necessary to display the hour indication H D10.
b) Press the toggle button T7 to increase or decrease the displayed hour until it matches the exact time.
c) Press button T6 again to display the minutes indication M D10.
d) Press the toggle button T7 to increase or decrease the displayed minutes until it shows the exact time in minutes.
3.3.14 Setting the times of the 1st and 2nd the operating programs (PROGR. 1 and PROGR. 2)
To set the times for starting and stopping the two air conditioner programs, proceed as follows:
a) Press button T6 (Time and Program Setting), as many times as necessary to display the indication
1
(Time to start the 1st
program).
b) Press the toggle button T7 to increase or decrease the display of the time when you want program 1 to start.
Every time you press one end of the toggle button the time increases or decreases by 30 minutes.
c) Press button T6 (Time and Program Setting) once again to display the indication
1
(Time to stop the 1st program).
d) Press the toggle button T7 to increase or decrease the indication of the time when you want program 1 to stop. Every time
you press one end of the toggle button the time increases or decreases by 30 minutes.
e) Press button T6 (Time and Program Setting) once again to display the indication
2
(Time to start the 2nd program).
f) Press the toggle button T7 to increase or decrease the display of the time when you want program 2 to start.
Every time you press one end of the toggle button the time setting increases or decreases by 30 minutes.
g) Press button T6 (Time and Program Setting) once again to display the indication
2
(Time to stop the 2nd program).
h) Press the toggle button T7 to increase or decrease the indication of the time when you want program 2 to stop. Every time
you press one end of the toggle button the time increases or decreases by 30 minutes.
i) To return to the routine operating mode just press the button T6 as many times as necessary to clear the relevant indications
from the display.
3
Downloaded from AC-Manual.com Manuals
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olimpia Splendid Unico at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olimpia Splendid Unico in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 11,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olimpia Splendid Unico

Olimpia Splendid Unico User Manual - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info