Manual Olimpia Splendid UI ALYAS E INVERTER 12 (page 117 of 138) (English, Dutch, Italian)

688897

117

Zoom out

Zoom in

1/138

If refrigerant piping is already embedded in

the wall, do the following:

Hook the top of the indoor unit on the upper

hook of the mounting plate.

Use a bracket or wedge to prop up the unit,

giving you enough room to connect the

refrigerant piping, signal cable, and drain

hose. Refer to Fig. 3.11 for an example.

Fig. 3.11

Fig. 3.12

Move to left or right

30-50mm

(1.2-1.95in)

30-50m m

(1.2-1.95in)

Connect drain hose and refrigerant piping

(refer to Refrigerant Piping Connection

section of this manual for instructions).

Keep pipe connection point exposed to

perform the leak test (refer to Electrical

Checks and Leak Checks section of this

manual).

After the leak test, wrap the connection point

with insulation tape.

Remove the bracket or wedge that is propping

up the unit.

Using even pressure, push down on the

bottom half of the unit. Keep pushing down

until the unit snaps onto the hooks along the

bottom of the mounting plate.

UNIT IS ADJUSTABLE

Keep in mind that the hooks on the mounting plate are smaller than the holes on the back of the

unit. If you ﬁnd that you don’t have ample room to connect embedded pipes to the indoor unit, the

unit can be adjusted left or right by about 30-50mm (1.25-1.95in), depending on the model. (See

Fig. 3.12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olimpia Splendid UI ALYAS E INVERTER 12 in the language / languages: English, Dutch, Italian as an attachment in your email.

The manual is 18,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olimpia Splendid UI ALYAS E INVERTER 12 Manual

Product: