688894
86
Zoom out
Zoom in
Previous page
1/336
Next page
ENGLISH
EN - 32
3.4.11 - LED/FOLLOW ME key (11)
Press this key for less than 2 seconds to start the LED function.
If the key is held down for more than 2 seconds, the FOLLOW ME function is activated.
Press the LED key to reset the air conditioner digital display; press it again to activate it.

When the air conditioner is put in “AUTO” mode, these will automatically select cooling, heating or fan,
depending on the temperature that has been selected and the room temperature.
Once the operational mode has been selected, the functioning conditions are stored in the memory of the
unit microcomputer and the air conditioner starts to function in the same conditions, when simply pressing
the “ON/OFF” key of the remote control.
START
Check that the unit is connected and is powered electrically.
a. Press the “MODE” key (1) to select “AUTO” mode.
b. Set the desired temperature by pressing the “TEMP” keys (4).
Normally the temperature is between 21°C and 28°C.
c. When the remote control is “OFF”, press the “ON/OFF” key (2) to start the air conditioner.
STOP
a. Press the “ON/OFF” key (2) to stop the air conditioner.
If the AUTO mode is not wanted, the desired conditions can be selected manually.
When AUTO mode is selected, the fan speed does not have to be set; the fan speed is controlled
automatically.

START
Check that the unit is connected and is powered electrically.
a. Press the “MODE” key (1) to select the “COOL”, “HEAT”, or “FAN ONLY”. mode.
b. Set the desired temperature by pressing the “TEMP” keys (4).
Normally the temperature is between 21°C and 28°C.
c. When the remote control is “OFF”, press the “ON/OFF” key (2) to start the air conditioner.
d. Press the fan speed key (FAN “5”) to select “AUTO”, “LOW”, “MED”, or “HIGH”.
e. When the remote control is “OFF”, press the “ON/OFF” key (2) to start the air conditioner.
The FAN ONLY mode does not adjust the temperature, therefore, to select this mode, only perform the “a”,
“c”, “d”, “e” phases.
STOP
a. Press the “ON/OFF” key (2) to stop the air conditioner.
If the AUTO mode is not wanted, the desired conditions can be selected manually.
3.5 - ADJUSTING AIR FLOW DIRECTION

generating irregular temperatures in the room.
a. Adjust the horizontal louvres using the remote control.
b.
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olimpia Splendid NEXYA S4 E - PENTA INVERTER 42 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olimpia Splendid NEXYA S4 E - PENTA INVERTER 42 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 21,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info