776121
30
Zoom out
Zoom in
Previous page
1/40
Next page
US-ENG- 18
US-ENGLISH
3.4 - OPERATING THE UNIT
3.4.1 - OPERATIONAL MODES - TURNING THE UNIT ON/OFF
• ButtonT1 is used to switch the unit off (stand-by mode) or to switch the unit back on.
An EPROM contained in the unit’s control board system settings are memorized when the unit is turned
off.
If the unit will not be used for an extended period of time it should be de-energized by turning off
the main power supply or pulling the plug from the wall outlet.
3.4.2 - WELL BEING KEY (AUTOMATIC OPERATING)
• ButtonT2 is used to allow the unit to provide optimal comfort in the space being conditioned. Based on
the temperature in the room, the unit will automatically set the operating mode (cooling, ventilation or
heating if available), the temperature setting and fan speed.
3.4.3 - COOLING MODE
• Inthismode,theunitdehumidiesandcoolstheroom.ActivatethismodebypressingbuttonT4 (run
modeselector)untilthe“snowake”symbolD3 is displayed. The desired temperature and fan speed can
now be selected.
• Afteramaximum3minutedelay(dependingwhenthecompressorranlast)thecompressorwillstart,
providing cooling to the space. Startup of the compressor is indicated by LED B being illuminated (green).
3.4.4 - DEHUMIDIFICATION MODE
In this mode the unit lowers the humidity level in the space.
• Thisfunctionisveryusefulduringtheshouldermonthsbetweencoolingandheatingseasons,particularly
on rainy days when the temperature is moderate, but the humidity in the space is high, causing occupant
discomfort.
• Inthismoderoomtemperatureandfanspeedsettingsareignoredandassuchnotemperatureandfan
speed indications are displayed.
• ActivatethismodebypressingbuttonT4 (run mode selector) until the “droplet” symbol D4 and automatic
ventilation symbol D1 are displayed.
Indehumidicationmodeitisnormalfortheunittofunctionintermittently.
3.4.5 - FAN MODE
• Whenusedinthismodetheunitdoesnotperformanyfunctioninregardstotemperatureandairhumidity
control in the room.
• ActivatethismodebypressingbuttonT4 (run mode selector) until the fan symbol D1 is displayed. In fan
mode you can select the fan speed.
3.4.6 - HEATING/ DEFROST MODE
This mode is only available on heating pump (HP) models.
• ToactivateheatingmodepressbuttonT4 (run mode selector) until the “sun” symbol D2 is displayed. The
required temperature and fan speed can be selected.
• Afteramaximumof3minutesthecompressorshouldstart,andunitprovidesheattothespace.Thestart
of the compressor is indicated by LED B being illuminated (green).
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olimpia Splendid Maestro Smart at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olimpia Splendid Maestro Smart in the language / languages: English as an attachment in your email.

The manual is 7.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info