703020
22
Zoom out
Zoom in
Previous page
1/36
Next page
22
I GB F
Collegare il cavo ad una
presa di alimentazione.
SELEZIONE FUNZIONI
- Per attivare la funzione
VENTILAZIONE, ruotare
la manopola "B" in modo
che il riferimento " I " (g.
1) sia allineato al simbolo
" VENTOLA " presente sul
pannello comandi (g. 3).
- Per attivare la
funzione POTENZA
MINIMA, ruotare la
manopola "B" (fig. 1) in
modo che il riferimento
I“ sia allineato al simbolo
“ presente sul pannello
comandi (g. 4).
- Per attivare la funzione
POTENZA MASSIMA,
ruotare la manopola "B" (g.
1)in modo che il riferimento
I “ sia allineato al simbolo
“ presente sul pannello
comandi (g. 5).
IMPOSTAZIONE
TERMOSTATO
- Per settare la temperatura
ambiente ad un dato
valore ( termostatazione)
posizionare il rif.
"A " (fig. 1) all'interno
della scala graduata
(g. 6).
Se la Temperatura ambiente
è uguale o superiore alla
temperatura impostata
l’apparecchio si arresta. Se
la temperatura ambiente è
inferiore alla temperatura
impostata l’apparecchio
funzionerà alla potenza
selezionata.
- Plug the cord into a power
outlet.
SELECTING FUNCTIONS
- To activate VENTILATION
function, turn knob "B" so
that reference mark “ I
(g. 1) is aligned with the
FAN symbol on the control
panel (g. 3).
- To activate MINIMUM
POWER function, turn knob
"B" (g. 1) so that reference
mark I is aligned with the
symbol on the control
panel (g. 4)
.
- To activate MAXIMUM
POWER function, turn knob
"B" (g. 1) so that reference
mark I is aligned with the
symbol on the control
panel (g. 5).
SETTING THERMOSTAT
- To set the ambient
temperature to a given value
(thermostat), position ref.
"A "(g. 1) inside graduated
scale (g. 6).
If the room temperature
is equal to or higher than
the set temperature, the
appliance stops. If the
ambient temperature is
below the set temperature,
the appliance will operate at
the selected power level.
- Brancher le câble à une
prise d’alimentation.
SELECTION DES
FONCTIONS
- Pour activer la fonction
VENTILATION, tourner la
molette "B" de telle sorte
que la référence " I " (g. 1)
soit alignée sur le symbole "
VENTILATEUR " présent sur
le pupitre de commande (g.
3).
- Pour activer la fonction
PUISSANCE MINIMALE,
tourner la molette "B" (g. 1)
de telle sorte que la référence
I “ soit alignée sur le symbole
“ présent sur le pupitre de
commande (g. 4)
- Pour activer la fonction
PUISSANCE MAXIMALE,
tourner la molette "B" (g. 1)
de telle sorte que la référence
I “ soit alignée sur le symbole
“ présent sur le pupitre de
commande (g. 5).
REGLAGE THERMOSTAT
- Pour régler la température
ambiante sur une valeur
donnée (thermostat) amener
la réf. "A "(g. 1) à l'intérieur
de l'échelle graduée (g. 6).
Si la Température ambiante
est égale ou supérieure à
la température paramétrée,
l’appareil s’arrête. Si la
température ambiante est
inférieure à la température
paramétrée, l'appareil
fonctionne sur la puissance
sélectionnée.
g. 3
g. 5
g. 4
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olimpia Splendid Caldodesign at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olimpia Splendid Caldodesign in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info