588285
124
Zoom out
Zoom in
Previous page
1/144
Next page
GB
F
D
124
I
RECOMMENDATIONS FOR ENERGY
SAVINGS
- Always keep the filters clean (see
chapter on maintenance and
cleaning).
- Keep the doors and windows closed
in the air-conditioned rooms.
- Keep sunlight out of the room by
using curtains, lowering the shades
or closing the shutters.
- Do not obstruct the air flow (intake
and outlet) on the units; this in
addition to reducing the
performance of the system, will
jeopardize correct operation and
could cause irreparable damage.
FUNCTIONAL ASPECTS NOT TO BE
MISTAKEN FOR ANOMALIES
The following events may occur
during normal operation:
1. PROTECTION OF THE AIR
CONDITIONER.
Compressor protection
- The compressor can't restart for 3
minutes after it stops.
- Anti-cold air (Cooling and heating
models only)
- The unit is designed not to blow
cold air on HEAT mode, when the
indoor heat exchanger is in one of
the following three situations and
the set temperature has not been
reached.
A) When heating has just starting.
B) Defrosting.
C) Low temperature heating.
- The indoor or outdoor fan stop
running when defrosting (Cooling
and heating models only).
- Defrosting (Cooling and heating
models only)
- Frost may be generated on the
outdoor unit during heat cycle when
outdoor temperature is low and
humidity is high resulting in lower
heating efficiency of the air
conditioner.
- During this condition air conditioner
will stop heating operation and start
defrosting automatically.
- The time to defrost may vary from
4 to 10 minutes according to the
outdoor temperature and the
amount of frost buildup on the
outdoor unit.
3
CONSIGLI PER IL RISPARMIO
ENERGETICO
- Mantenere sempre e
costantemente puliti i filtri (vedi
capitolo manutenzione e pulizia).
- Mantenere chiuse le porte e le
finestre dei locali da climatizzare
- Evitare che i raggi solari penetrino
liberamente nell’ambiente (si
consiglia l’utilizzo di tende o
abbassare tapparelle o chiudere le
persiane)
- Non ostruire le via di flusso dell’aria
(in entrata ed in uscita) delle unità;
ciò, oltre ad ottenere una resa
dell’impianto non ottimale,
pregiudica anche il suo corretto
funzionamento e la possibilità di
guasti irreparabili alle unità
ASPETTI FUNZIONALI DA
NON INTERPRETARE COME
INCONVENIENTI
Durante il normale funzionamento è
possibile che si verifichi quanto
segue:
1. PROTEZIONE DEL
CONDIZIONATORE.
Protezione del compressore
- Il compressore non si riavvia per 3
minuti dopo che è stato spento.
Aria anti-freddo (solamente modelli
con raffreddamento e
riscaldamento)
- L'apparecchiatura è concepita in
modo che non soffi aria fredda nella
modalità RISCALDAMENTO,
quando lo scambiatore di calore
interno si trova in una delle
seguenti tre condizioni e la
temperatura impostata non è stata
raggiunta.
A) Quando è appena stato avviato
il riscaldamento.
B) Sbrinamento.
C) Riscaldamento a bassa
temperatura.
- Il ventilatore interno o esterno
smettono di funzionare durante lo
sbrinamento (solamente modelli con
raffreddamento e riscaldamento).
- Sbrinamento (solamente modelli con
raffreddamento e riscaldamento)
- La brina può prodursi sull'unità
esterna durante il ciclo di
riscaldamento, quando la
temperatura esterna è bassa e
l'umidità alta, cosa che provoca una
minore capacità di riscaldamento o
di condizionamento dell'aria.
- Se ciò si verifica, il condizionatore
arresterà la modalità riscaldamento
ed attiverà automaticamente la
funzione di sbrinamento.
- Il tempo necessario per effettuare
lo sbrinamento può variare dai 4 ai
10 minuti, a seconda della
temperatura esterna e del
quantitativo di brina che si è
formata sull'unità esterna.
CONSEILS POUR L’ECONOMIE
D’ENERGIE
- Maintenir toujours et constamment
les filtres propres (voir le chapitre
d’entretien et nettoyage).
- Maintenir fermées les portes et les
fenêtre des locaux à climatiser
- Eviter que les rayons de soleil
n’entrent librement dans la pièce
(on conseille l’utilisation de rideau
ou de baisser les stores ou de fermer
les persiennes)
- Ne pas obstruer les voies de
soufflage de l’air (en entrée et en
sortie) des unités; ceci, outre à
obtenir un rendement de
l’installation non optimal,
compromet aussi son correct
fonctionnement et la possibilité de
dommages irréparables aux unités
ASPECTS FONCTIONNELS A NE PAS
INTERPRETER COMME
INCONVENIENTS
Pendant le fonctionnement normal,
les phénomènes suivants peuvent
se produire:
1. PROTECTION DU CLIMATISEUR.
Protection du compresseur
- Le compresseur ne redémarre pas
au bout de 3 minutes après avoir
été éteint.
Air anti-froids (seulement sur les
modèles à refroidissement et
chauffage)
- L'appareil est conçu de façon à ne
pas souffler l'air froid en mode
CHAUFFAGE, quand l'échangeur
de chaleur se trouve dans l'une
des trois conditions suivantes et
que la température programmée
n'a pas été atteinte.
A) Quand le chauffage vient juste
d'être activé.
B) Dégivrage.
C) Chauffage à basse température.
- Le ventilateur interne ou externe
cesse de fonctionner pendant le
dégivrage (seulement sur les
modèles à refroidissement et
chauffage).
- Dégivrage (seulement sur les
modèles à refroidissement et
chauffage)
- Le givre peut s'accumuler sur
l'unité externe pendant le cycle de
chauffage, quand la température
externe est basse et que l'humidité
est élevée, ce qui provoque une
moindre capacité de chauffage ou
de refroidissement de l'air.
- Si cela se produit, le climatiseur
arrête le mode chauffage et active
automatiquement la fonction de
dégivrage.
- Le temps nécessaire pour effectuer
le dégivrage peut varier de 4 à 10
minutes, selon la température
extérieure et la quantité de givre
qui s'est formée sur l'unité
externe.
3.13 TIPPS ZUM ENERGIESPAREN
- Die Filter sind stets sauber zu
halten (siehe Kapitel „Wartung und
Reinigung des Klimagerätes”).
- Die Türen und Fenster der
klimatisierten Räume sind
geschlossen zu halten.
- Direkte Sonneneinstrahlung in den
Raum ist zu vermeiden (Vorhänge
zuziehen, Jalousien herunterlassen
oder Fensterläden schließen).
- Die Öffnungen für den Luftein- und
austritt der Einheiten sind frei zu
halten, damit die Luft zirkulieren
kann. Ein nicht einwandfreier
Luftstrom beeinträchtigt nicht nur
die Leistungsfähigkeit der Anlage,
sondern auch die normale
Funktionsfähigkeit, wodurch
irreparable Schäden an der Anlage
entstehen können.
FUNKTIONALE ASPEKTE, DIE NICHT
ALS STÖRUNGEN ZU VERSTEHEN
SIND
Während des Normalbetriebs können
sich folgende Situationen einstellen:
1. SCHUTZ DES KLIMAGERÄTES
Kompressorschutz
- Der Kompressor schaltet sich 3
Minuten nach dem Ausschalten
nicht wieder ein.
Kälteschutzluft (nur bei Modellen
mit Kühlung und Heizung)
- Das Klimagerät ist so konzipiert,
dass im Modus HEIZUNG keine
Kaltluft bläst, wenn sich der
Innenwärmeüberträger in einem
der folgenden drei Zustände
befindet und die eingestellte
Temperatur nicht erreicht wurde.
A) Wenn die Heizung gerade
gestartet wurde.
B) Abtauen.
C) Heizung bei niedriger
Temperatur.
- Die innere und äußere Ventilator
arbeiten nicht mehr während des
Abtauens (nur bei Modellen mit
Kühlung und Heizung).
- Abtauen (nur bei Modellen mit
Kühlung und Heizung).
- Der Tau kann sich während des
Heizzyklus auf der Außeneinheit
bilden, wenn die Außentemperatur
niedrig und die Feuchtigkeit hoch
ist. Dies führt zu einer geringeren
Heiz- oder
Klimatisierungskapazität.
- Die Klimaanlage schaltet in diesem
Fall die Betriebsart Heizung ab und
startet automatisch die
Abtaufunktion
- Die notwendige Zeit zur
Durchführung des Abtauens kann
zwischen 4 und 10 Minuten liegen,
je nach Außentemperatur und
Taumenge, die sich auf der
Außeneinheit gebildet hat.
3.14
Downloaded from AC-Manual.com Manuals
124


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olimpia Splendid Big inverter DC 18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olimpia Splendid Big inverter DC 18 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info