644158
25
Zoom out
Zoom in
Previous page
1/202
Next page
21
I
GB
F
D
E
SK
P
GR
TR
CZ
RUS
UK
PL
TRANSLATION OF ORIGINAL INSTRUCTIONS
INTRODUCTION
For correct use of the machine and to avoid
accidents, do not start working until you have
read this manual carefully. You will find
explanations concerning the operation of the
various parts plus instructions for necessary
checks and relative maintenance.
NOTE: The descriptions and illustrations
contained in this manual are not binding.
The manufacturer reserves the right to
undertake any modifications it deems
necessary without revising this manual.
In addition to the operating instructions, this
manual contains paragraphs that require your
special attention. Such paragraphs are marked
with the symbols described below:
WARNING: where there is a risk of an accident
or personal, even fatal, injury or serious damage
to property.
CAUTION: where there is a risk of damaging the
machine or its individual components.
WARNING
RISK OF HEARING DAMAGE
IN NORMAL CONDITIONS OF USE, THIS MACHINE
MAY EXPOSE THE OPERATOR TO A PERSONAL DAILY
NOISE LEVEL EQUAL TO OR HIGHER THAN
85 dB (A)
CONTENTS
1. EXPLANATION OF SYMBOLS AND
SAFETY WARNINGS _______________ 21
2. ELETTRIC SAW COMPONENTS ______ 22
3. SAFETY PRECAUTION _____________ 22
4. FITTING THE BAR AND CHAIN _______ 26
5. STARTING _______________________ 27
6. STOPPING THE ENGINE ____________ 28
7. USE ____________________________ 28
8. MAINTENANCE ___________________ 30
9. STORAGE ________________________ 32
10. TECHNICAL DATA _________________ 33
11. DECLARATION OF CONFORMITY ____ 34
12. WARRANTY CERTIFICATE __________ 35
13. TROUBLE SHOOTING CHART _______ 36
1. EXPLANATION OF SYMBOLS AND
SAFETY WARNINGS (Fig.1)
1. Read operator’s instruction book before
operating this machine.
2. Wear head, eye and ear protection.
3. This symbol indicates Warning and Caution
4. Immediately disconnect the plug if the
cable is damaged or cut
5. Do not expose the electric saw to rain or
high humidity conditions
6. Chain rotation direction - Maximum cutting
length
7. Double insulation device
8. Specifications
9. Type of machine: ELECTRIC CHAIN SAW.
10. Guaranteed sound power level
11. Serial number
12. CE conformity marking.
13. Year of manufacture
USER INFORMATION
In accordance with Directives
2011/65/CE and 2012/19/CE
on the reduction of hazardous
substances in electrical and
electronic equipment (ROHS)
and the disposal of waste from
such equipment (WEEE)
When the symbol depicting a crossed-out
refuse bin appears on equipment, this means
that it must be collected separately from other
waste at the end of its working life.
When the equipment is no longer serviceable,
accordingly, it should be taken by the user to
a special sorted collection centre for electrical
and electronic waste, or if purchasing a new
product of similar type, returned to the
dealer on a one-for-one basis (takeback
scheme).
Proper sorted collection ensures that the
discarded equipment can be sent subsequently
for eco-friendly recycling, treatment and
disposal; this helps to avoid any possible
negative impact on the environment and
on health, besides enabling the reclamation
of materials used in manufacturing the
equipment.
Unauthorized dumping of waste is
irresponsible, and punishable under statutory
regulations.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oleo-Mac GS180E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oleo-Mac GS180E in the language / languages: English, German, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oleo-Mac GS180E

Oleo-Mac GS180E User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info