Manual OldScool 23C10 - 23045 (page 26 of 69) (English, German, Dutch, French)

808613

Zoom out

Zoom in

1/69

4. Place the water tank back on the machine. Make sure that the hooks at the top fall securely into the fixed part of the

machine

5. Make sure there is always sufficient water in the reservoir, if the machine is used without water this may cause damage to

the machine

Inserting drip tray and drip grid

1. Make sure the drip tray is always correctly positioned in the machine's designated recess

2. Place the drip grid on the drip tray.

Inserting and replacing the filter

The espresso machine is equipped with 2 sieves. 1 for a single espresso and 1 for a double espresso

The espresso strainers have a small mark in the form of a round "ball" on the outside of the strainer, above which is a small notch in

the edge of the strainer. When you place the sieve in the holder, make sure this little ball is at the front of the sieve holder, the sieve

holder itself has a small recess into which this little ball falls exactly. Then turn the sieve slightly. This will prevent the sieve from falling

out of the sieve holder.

1. Select the desired sieve (single or double) according to whether you want to make a single or double espresso.

2. Place the sieve at an angle in the sieve holder with the ball side at the front at the level of the recess in the sieve holder. Pr es s

the sieve down so that it falls into the opening and then turn it slightly. This will prevent it from falling out of the sieve holder.

To remove the sieve from the sieve hol der again, turn it so that th e ba ll or n otch is again at the level of the openi ng in t he sieve holder.

In this position, you can remove the sieve.

CAUTION!!! After use, making an espresso, this sieve and this part of the sieve holder is hot. Therefore, always let it cool down first.

If you want to make another espresso in between, raise the clip in the sieve holder. It then clamps around the sieve and you can shake

the coffee grounds out of the sieve over a waste bin or tray. There is no need to touch the sieve itself.

Inserting or removing the sieve holder from the machine

1. Always grasp the sieve holder by the plastic handle. Place the handle under the open lock as shown on the front of the

machine (under control buttons)

2. Turn the sieve holder handle to the right without it extending under the closed lock as shown on the front of the machine

(under control buttons.

sieve for some

sieve for double

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of OldScool 23C10 - 23045 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

OldScool 23C10 - 23045 Manual

Product: