808612

OldScool 23C10 - 23040 Manual

30
Zoom out
Zoom in
Previous page
1/69
Next page
30
3. Press the selected espresso button (single or double) and hot water will come out of the steam pipe.
4. Never let more than 100ml flow out of the steam nozzle, when this amount is reached stop process by pressing the
selected espresso button again.
5. Turn the dial back towards "-" (OFF).
The blue LED lights up again, indicating that the machine is heating up. When this blue light is lit continuously again, the
espresso machine is back up to temperature and ready for a new cup of espresso.
The maximum useable time for drawing off water from the steam pipe is 80 seconds, after which this function will stop automatically,
make sure that after these 80 seconds the dial is turned back to the "-" position.
When the machine has reheated again, this function can be used again.
Frothing milk.
DANGER to burn injuries!
•Hot steam and hot water escapes when working with the steam nozzle 8. The steam nozzle becomes very hot. Only grasp the
steam nozzle by the plastic handle 10. Never hold hands or other parts of the body in the water vapour.
•When frothing milk with the steam nozzle 8: first dip the steam nozzle into the milk before starting the steam function. And
stop the steam function before taking the steam nozzle out again.
In addition to dispensing hot water, the steam pipe can also be used to froth milk. This requires a little practice. To get the right frothed
milk, we advise you to:
-Try milk from different manufacturers.
-Use milk with a high protein content, this foams better
-Use milk with a higher fat content if you want a more creamy milk
-Always use milk from the refrigerator (around 5 °C).
-When frothing, do not let the milk get boiling hot. Higher temperatures alter the flavour and collapse the milk foam. A hint:
with a metal jug, the right temperature is reached when the side walls of the jug are too hot to hold in your hand.
-Do not wait too long once the milk has frothed. Some of the foam will otherwise collapse again.
Make sure the machine is ready for use, with the blue LED lighting under the selectable espresso buttons on continuously. The dial on
the side for steam delivery is in the "-" position (OFF)
1. Fill a container to a maximum of half with cold milk.
2. Press the steam button
-The steam LED flashes.
-The machine heats up for steam production.
3. When the steam LED lights up continuously, the appliance is ready to produce steam.
4. Hold another container under the steam pipe and slowly turn the dial in the direction of the "+" symbol.Steam comes out of
the pipe.
-The steam LED light flashes.
5. Let a little steam come out and then interrupt this by turning the rotary knob to "-" (off).
6. Dip the steam pipe into the milk and slowly turn the rotary switch back in the direction of the symbol
7. When it is visible that the volume of milk has increased (about 50%) immerse the steam nozzle a little deeper. The whirlpool
should remain present. Now the bubbles are distributed more finely.
8. When the milk foam has the desired density, turn the knob back to "-" (off)
9. You can run the milk frothing procedure for a maximum of 80 seconds, after this time period the machine switches this
function off by itself
10. Add the milk froth to the espresso as soon as possible.
11. To avoi d mi lk resid ues remaining or caking on the milk nozzle, clean it with a clean, possibly slightly damp, cloth as soon as
possible after use.
12. Then open the rotary switch briefly to allow steam to escape. This removes any remaining milk residues.
13. Finally, turn the switch back to the "-" position (OFF).
14. Press the steam button on the front of the machine to unlock this function. The machine then automatically switches to the
espresso function.
When switching on the steam function, you will see that the pointer in the temperature indicator rises further than when using the
espresso function. You can also use this function to make a slightly hotter espresso. Bear in mind, however, that too hot an espresso
will lose its aroma
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OldScool 23C10 - 23040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OldScool 23C10 - 23040 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info