665285
46
Zoom out
Zoom in
Previous page
1/128
Next page
- 46 -
Supported Paper
2
2. Printing Basic Operation
Use paper that meets the following conditions*
1
:
Paper that meets the conditions for plain paper.
An ink used for a part printing is heat resistant (230°C).
Note
When specifying a printing area, please take into account the differences of printing position as followings:
Print start position: ±2 mm, Paper skew: ±1 mm/100 mm, Image stretch: ±1 mm/100 mm
(when paper ream weight is 70 kg)
This printer cannot print on an ink.
Use paper that meets the following conditions*
2
:
A pigment or an ink used to color paper is heat resistant (230°C).
Paper that has same characteristics with light paper and used for an electronic photo printer.
Paper Recommendations
Your printer will handle a variety of print media,
including a range of paper weights and sizes.
This section provides general advice on choice of
media, and explains how to use each type.
The best performance will be obtained when
using standard 75 - 90 g/m
2
paper designed for
use in copiers and laser printers.
Use of heavily embossed or very rough textured
paper is not recommended.
Pre-printed stationery can be used, but the ink
must not offset when exposed to the high fuser
temperatures used in the printing process.
CAUTION
Envelopes should be free from twist, curl or
other deformations. They should also be of the
rectangular ap type, with glue that remains
intact when subjected to hot roll pressure fusing
used in this type of printer. Window envelopes are
not suitable.
Labels should also be of the type recommended
for use in copiers and laser printers, in which the
base carrier page is entirely covered by labels.
Other types of label stock may damage the printer
due to the labels peeling off during the printing
process.
Storing Paper
Store paper under the following conditions to
maintain quality.
Inside a cabinet or other dry and dark place
On a at surface
Temperature: 20°C
Humidity: 50% RH (relative humidity)
Do not store in the following locations.
Directly on the oor
In direct sunlight
Near the inside of an exterior wall
On an uneven surface
Where static electricity may be generated
In places that are excessively hot or where
temperature rapidly changes
Near a copier, air conditioner, heater, or duct
Note
Do not unwrap the paper until you are ready to use the
paper.
Do not leave paper unwrapped for a long period. Doing
so may result in paper handling and print quality issues.
Depending on a media you use, usage conditions and a
storing conditions, a decrease in paper quality or curling
of the paper may occur.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki Pro8432 WT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki Pro8432 WT in the language / languages: English as an attachment in your email.

The manual is 41,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki Pro8432 WT

Oki Pro8432 WT Additional guide - English - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info