665283
57
Zoom out
Zoom in
Previous page
1/87
Next page
Menu functions > 57
Flash
Memory
Setup
Initialize Execute Initializes Resident FLASH.
When the Enter button is pressed, the following
confirmation message appears.
Are You Sure? Yes/No
If No is selected, the previous menu display resumes.
If Yes is selected, the following confirmation message
displays.
Execute Now? Yes/No
If No is selected, the previous menu display resumes. At
this time, the request to execute FLASH initialization is
put into the memory and initialization will be executed at
power cycle.
If Yes is selected, shutdown takes place, and FLASH is
initialized at power Off/On cycle.
System
setup
Near Life
Status
Enable/Disable Set LCD panel control at the time of near-life warning for
Print Cartridge, fuser and belt.
Enable: Display a near-life warning.
Disable: Do not display a near-life warning.
Near Life
LED
Enable/Disable Controls the settings of the Attention LED when near
end of life warning of Print Cartridge, fuser, or belt occurs.
Attention LED is lit when enabled, not lit if disabled.
(Displays LCD message.)
The temporary recovery by opening and closing of the
cover in Life error is not included.
Time Setup Date Format mm/dd/yyyy
dd/mm/yyyy
yyyy/mm/dd
Set desired date format.
Time Zone -13:00
~
0:00
~
+13:00
Enter the time zone for your country in relation to GMT.
Set in quarter units within the range.
Use the Menu up/down buttons to increment/decrement
and press the Enter button to set and proceed to the next
digit.
Daylight
Saving
On
Off
Enable/disable daylight saving setting.
Time Setting 01/01/2000
00:00
~
01/01/2009
00:00
~
31/12/2091
23:59
Set current date and time.
Display format follows the settings selected in Date
Format.
Change
Password
New
Password
xxxxxxxxxxxxxx Sets a new password to enter Admin Setup menu
From 6 to 12 alpha/numeric digits can be entered.
Verify
password
xxxxxxxxxxxxxx Forces the User to input the new password to enter Admin
Setup.
From 6 to 12 alpha/numeric digits can be entered.
ITEM SETTINGS EXPLANATION
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki Pro6410 Neon Color at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki Pro6410 Neon Color in the language / languages: English as an attachment in your email.

The manual is 5,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info