492963
37
Zoom out
Zoom in
Previous page
1/46
Next page
User’s Guide
|
E-37
Hardware Problems
Symptom: Graphic image prints partly on one page,
partly on the next.
Problem: Insufficient printer memory for this image at
this resolution.
Solution: Change the resolution, reduce the image size,
or install more memory in your printer.
Symptom: Nothing happens, but printer indicates it is
ready to receive data.
Problem: Configuration error.
Solution: Check cable connection; if serial, make sure
appropriate MODE command has been used (PC). If
more than one printer is available, make sure your
printer has been selected. Make sure your printer is
on-line.
Symptom: “Garbage” prints.
Problem: Incorrect cable configuration. (Also, see
“Software Problems.”)
Solution: Check cable configuration, continuity, and
length.
Symptom: Printer freezes or displays error message
when computer is rebooted.
Problem: Booting the computer while the printer is on
can cause a communications error.
Solution: Take printer off-line before rebooting
computer.
Problem: Gases are given off by forms or adhesives
passing through the hot fusing unit.
Solution: Make sure the forms you use can withstand
heating, and provide adequate ventilation.
Symptom: Data is sent to printer, but nothing happens.
ON-LINE message appears.
Problem: Wrong interface cable.
Solution: Use correct cable. If optional Serial I/F is
installed, make sure RS232C Serial is selected in the
Level 1 menu and RS232C Serial settings in Level 2
menu are correct.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki OKIPAGE 14e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki OKIPAGE 14e in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info