424254
95
Zoom out
Zoom in
Previous page
1/124
Next page
89
When 0.0.0.0 is set as the IP address, the DHCP function
automatically starts. If a DHCP server is found, an IP
address is obtained from the DHCP server.
From then on, an IP address is obtained from the DHCP
server each time the power is turned OFF and ON; therefore,
it is not necessary to change the IP address. When an IP
address is obtained from the DHCP server, the address is
displayed and an asterisk (*) appears at the end.
If you wish to set a fixed IP address, input the IP address
(numbers). Other than the IP address, a SUBNET MASK,
DEFAULT, GATEWAY, and DNS SERVER address are also
obtained from the DHCP server automatically. Sometimes
they cannot be obtained depending upon the setup of the
DHCP server. In such a scenario, set each address one at a
time.
Subnetmask
Sets the subnet mask.
Default Gateway
Sets the default gateway address.
SMTP Server Name
Enter either the IP address or the host name of the SMTP mail
server.
!
If the DNS name of the SMTP server does not work, try
entering the IP address of the SMTP server.
1. Press the Number keys to insert either text or numbers.
Press them repeatedly to enter the character desired.
2. To jump to the next field, use the or
key.
3. Press the
Start key to enter your settings.
Restrictions
If DNS has not been set, enter the IP address of the server.
The address must include the “.” (period) dividers (e.g.,
192.168.4.123).
Up to 64 characters may be entered.
You may use Latin letters, numbers and symbols.
To enter symbols, use either one-touch keys or key “0” of the
numeric ten-key pad.
The symbols that can be used are: ! # & ’ ( ) * + , - . / : ; = ?
· @ ? ” _ % ~
The “~” (tilde) symbol shows on the display as “
-1
”.
The ” and ’ symbols cannot be used.
Both uppercase and lowercase letters can be used. To
change the case, press the
1/CAPS key.
POP Server Name
Enter either the IP address or the host name of the POP mail
server.
!
If the DNS name of the POP server does not work, try entering
the IP address of the POP server.
YES
NO
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki of 5680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki of 5680 in the language / languages: English as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info