62
Protocol Dump
In the event of an obstruction to transmission, use the following
report to analyze the cause of the obstruction. Send this report to
the dealer or service center if so requested.
Other Reports
Message Confirmation Report
This report provides information about your last single-location
fax transmission or polling transmission. To print, see “Printing
Message Confirmation Report” on page 63. Information in this
report includes:
– The date of the communication.
– The total amount of time your fax machine spent sending (S,
R-TIME).
– The Personal ID or telephone number of the fax machine you
were sending a fax to (DISTANT STATION ID). If the remote
fax machine does not have a Personal ID or telephone number
programmed, the Location ID or telephone number you
entered is printed.
– The communication mode used.
– The number of pages sent.
– The result of the communication.
– Service codes.
– Depending on the settings of your fax machine, a portion of the
page will be printed after the report (see 04:IMAGE IN MCF.
on page 53).
Confidential Reception Report
This report is automatically printed each time your fax machine
receives a confidential message into a mailbox. Information in
this report includes:
– The date the message was received.
– The total amount of time your fax machine spent receiving the
message (S, R-TIME).
– The Personal ID or telephone number of the fax machine you
were communicating with (DISTANT STATION ID). If the
Personal ID or telephone number has not been programmed by
the sending fax machine, no DISTANT STATION ID is
recorded.
– The number of the mailbox into which the message was
received.
– The number of pages sent or received.
– The result of the communication.
– Service Codes
Broadcast Entry Report
Each time you program a multiple-location transmission (or
broadcast), your fax machine will give you the option of printing
this report to confirm your entries. Information in this report
includes:
