424254
62
Zoom out
Zoom in
Previous page
1/124
Next page
56
there will be no change in fax transmission time because
ECM will not be used.
20: REMOTE DIAGNOSIS: The remote diagnostics feature
allows a service person to remotely dial and service your fax
machine. Available settings are On and Off.
22: NO TONER MEM RX: With this function turned on, your
fax machine will automatically receive and store messages in its
memory when it is low on toner. When turned off, messages will
print even if toner is low or empty. Available settings are On and
Off.
23: MEM FULL SAVE: With Broadcast Transmission and other
functions, call origination starts after an entire document is read
into memory. If during this process, memory becomes full and an
“operator time out” seems likely, a message to that effect is
shown in the Display Panel if this MEM full save function is on.
If it is off, data that could not be read into memory is
automatically deleted. Available settings are On and Off.
24: CONTINUOUS TONE: With this function on, you can
choose whether to have a warning tone sound when receiving a
transmission. Pressing the
STOP key turns off the tone. Set this
function to off for no warning sound. Available settings are On
and Off.
25: INSTANT DIAL: Set this function to start reading documents
upon call origination when transmitting. Available settings are
On and Off.
Broadcast Mode
Memory available: all the documents are read into the mem-
ory before call origination.
Memory full: reading is impossible.
25 Instant Dial = ON:
Memory available: document reading starts upon call origi-
nation.
Memory full—Feeder transmission: starts reading document
when receiving the CFR signal of the remote machines after
call origination.
25 Instant Dial = OFF, 17 Mem./Feeder SW = MEMORY:
Memory Available: call origination after all documents are
read into memory.
Memory Full—Feeder transmission: starts reading document
when receiving the CFR signal of the remote machines after
call origination.
25 Instant Dial = OFF, 17 Mem./Feeder SW = FEEDER:
Memory Available—Feeder transmission: starts reading doc-
ument when receiving the CFR signal of the remote
machines after call origination.
Memory Full—Feeder transmission: starts reading document
when receiving the CFR signal of the remote machines after
call origination.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki of 5680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki of 5680 in the language / languages: English as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info