424254
34
Zoom out
Zoom in
Previous page
1/124
Next page
28
6. To accept the language change, press the YES key.
7. Press the
Select Function key to finish.
Connecting to a PBX
A PBX (Private Branch Exchange) is a private telephone system
used to route internal calls. If you have to dial a prefix (access)
number to get an outside line, then your line is connected to a
PBX. If you are connecting your fax machine to a PBX, follow
the instructions below. These setting changes allow your fax
machine to identify the numbers of the prefix digits required to
dial an outside line on your PBX. After it dials the prefix digits,
your fax machine will wait until it sees that the outside line is
available before dialing the rest of the number.
Note: In some countries you may require service assistance to
make these changes. Also, some PBX installations may
require additional adjustments to your fax machine. If you
continue to have difficulty with fax communication after
following these steps, contact your dealer.
1. Press the Select Function key.
2. Press the
9/User Prog. One-Touch key. The display shows
1:FUNC. PROGRAMMING.
3. On the numeric keypad, press
2. The display shows 2:DIAL
PARAMETER
.
4. Press the
YES key until the display shows PBX LINE / [OFF].
5. Press the
NO key. The display changes to PBX LINE / [ON].
6. Press the
YES key until the display shows DIAL PREFIX /
[OFF]
.
7. Press the
NO key. The display changes to DIAL PREFIX / [ ]
ENTER 4DIGITS
.
8. Using the numeric keypad, enter the number you normally
dial from your PBX to obtain an outside line.
9. Press the
YES key and then the Select Function key to
finish.
Note: The DIAL PREFIX number of your PBX LINE must be
included in all outside telephone numbers you program
into your fax machine or dial with the numeric keypad.
To later turn off the PBX LINE and DIAL PREFIX
functions, follow Steps 1 - 7 above. At Step 8, press the
Space key four times, then continue with Steps 9 - 10.
SELECT
FUNCTION
USER
PROG.
9/OP
ABC
2
PBX LINE
[ OFF ] YES ( ) NO ( )
YES
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki of 5680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki of 5680 in the language / languages: English as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info