423827
56
Zoom out
Zoom in
Previous page
1/104
Next page
48 User’s Guide
The available settings are limit reception only (RX), limit both
transmission and reception (T/R), and no limitation on transmission or
reception (OFF). To use the closed network function, follow the
instructions below.
1. Press the Select Function key.
2. Press the 9/User Program One Touch key. The display shows
1:FUNC. PROGRAMMING.
3. Press the YES key. The display shows FUNCTION NO. [ ].
4. Using the numeric keypad, enter 08. The display shows
08:CLOSED NETWORK, and the current setting of this function.
5. Press the NO key until the setting you want appears in the display.
6. Press the YES key to confirm the new setting.
7. Press the Select Function key to finish.
Power failures & memory
If power is interrupted to your fax machine, the following problems will
occur:
Any messages your fax machine has scanned into memory, but not
yet transmitted, are lost.
Any messages your fax machine has received into memory, but not
yet printed, are lost.
If you have loaded documents onto the document feeder of your fax
machine, any dialling or transmission settings are lost.
Your fax machine prints a power outage report to inform you of a power
failure. Use this report to determine which received messages you may
have lost and which transmissions you may have to resend. Refer to
Reports for more information.
Making copies
Your fax machine can also be used to make copies. You can make up to 50
copies at one time. Your fax machine automatically makes all copies in
FINE mode. EX.FINE and PHOTO mode can be selected manually by
pressing the YES key.
1. Load your documents.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki of 5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki of 5400 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info