665636

Oki MPS5502 Manual

63
Zoom out
Zoom in
Previous page
1/94
Next page
SENDING/RECEIVING A FAX
- 63 -
1
2
3
4
5
6
ECM
Switch the ECM (Error Correction Mode) communication ON or
OFF. ECM is an internationally standardized communication
mode that automatically corrects errors that occur during fax
transmissions. With this setting option ON, even when the
transmitted data have been affected by noise during
communication, this mode allows good communication without
image distortion by automatically resending the parts that have
been affected.
Note
• Both the sender and the receiver must have the ECM
function to make ECM communication available.
• When affected by noise during communication,
communication time is slightly longer than usual. Even when
the ECM communication is used, an error may occur
depending on the line status.
• The ECM communication is not available for voice
communication.
QUALITY TX
Switch Quality TX ON or OFF. When this mode is set to ON,
originals are sent at a slower speed than usual and the
chances of errors occurring decrease.
MAIL BOX COMMUNICATION
For the communication compatible with ITU-T (International
Telecommunications Union-Telecommunications) standards,
specify a subaddress or password to be sent to the recipient's
fax machine. (Up to 20 digits can be entered.)
Memo
• To use this function, the recipient’s fax machine must be
capable of setting an ITU-T compatible subaddress or
password.
INTERNET FAX
This is not used for sending a standard fax.
Changing the settings for each page
You can change the scanning conditions (RESOLUTION,
MODE, EXPOSURE and ORIGINAL) for each page.
1
Specify the recipients and press [SEND] to
start scanning a document. When the
scanning of the original is completed, the
confirmation screen for the next original is
displayed. Press [OPTION].
The illustration above shows the original placed on the
document glass. If you place an original on the RADF
(Reversing Automatic Document Feeder) and press the
[CONTINUE] button during scanning, the confirmation
screen for the next original is displayed after the scanning
is completed. If you press the [STOP] button during
scanning, the scanning halts and the confirmation screen
for the next original can be displayed.
2
The setting screen for the scanning
conditions is displayed. Change the
setting, and then press [OK].
P.62 "Making settings"
SUB
(Subaddress):
Information to send data of the original
to the fax machine.
SEP (Selective
Polling):
Information to retrieve data of the
original from the fax machine.
SID (Sender
Identification):
Password for SUB.
PWD (Password): Password for SEP.
SUBJECT: The subject of the Internet Fax
BODY: The body of the Internet Fax
… 63 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki MPS5502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki MPS5502 in the language / languages: English as an attachment in your email.

The manual is 12,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info