665636
33
Zoom out
Zoom in
Previous page
1/94
Next page
HOW TO MAKE COPIES
- 33 -
1
2
3
4
5
6
Scanning the next original during
copying
Even if copying is in progress or “READY (WARMING UP)” is
displayed on the touch panel, you can scan the next original
(auto job start).
1
Place the original(s).
2
Set the number of copy sets and the copy
modes as required.
Note
The new job starts in the copy modes that you
previously selected unless you select other modes.
3
Press the [START] button on the control
panel.
Memo
A maximum of 1000 sheets can be scanned per 1 copy
job or up until the embedded memory becomes full.
Confirming auto jobs
You can confirm which jobs are in waiting on the touch panel or
cancel them as required. For details, see the following Guide:
Advanced Guide
Canceling jobs being scanned
Press the [STOP] button on the control panel to stop a job
while originals are being scanned.
When you press [JOB CANCEL] on the touch panel or the
[RESET] button on the control panel while the scanning is
being paused, the scanning will end. (In this case, the data
which were scanned before the job was paused will be copied.)
To restart the scanning, press the [START] button.
Interrupting copying and making other
copies
You can interrupt the copy job in progress to make other copies
(interrupt copying). When restarting the interrupted job, you do
not have to reselect copy modes that have been set because
they are memorized in this equipment.
Note
The following functions cannot be used together with
interrupt copying:
Cover sheet copying, Sheet insertion copying, Job build,
Store to e-Filing, Copy & File
During interrupt copying, the mode cannot be changed to a
non-copying one, such as e-Filing, scanning, printing or fax.
To change the mode, first press the [INTERRUPT] button to
clear the interrupt copying.
1
Press the [INTERRUPT] button on the
control panel.
“Job interrupted job 1 saved” appears, and
“COPY(Interrupt)” is displayed on the function display.
Memo
If the original is being scanned, the message above
appears after the scanning has finished.
2
Replace the original with a new one.
3
Select other copy modes as required and
then press the [START] button on the
control panel.
4
Press the [INTERRUPT] button again after
the interrupt copying has finished.
“Ready to resume job 1” appears and the interrupted job
restarts.
Proof copy
When you make a large amount of copies, you can check if
they will be made exactly as you desire by copying only one
page before copying them all (proof copy). Then you can
change the modes or settings (e.g. the number of copy sets,
receiving tray, page number, time stamp, sort/stapling) after
checking the proof copy.
FC
FC
FC
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki MPS5502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki MPS5502 in the language / languages: English as an attachment in your email.

The manual is 12,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info