563102
40
Zoom out
Zoom in
Previous page
1/81
Next page
Operating instructions > 40
S
ETTING
MENU
VALUES
The following information explains the printer settings and how you can change them.
Printer items and their values are printed for reference.
C
ONFIRMING
CURRENT
SETTINGS
To print the current menu settings, use a cut sheet of A4 paper or continuous forms of width
at least 254 mm. In this example, two sheets of A4 paper is used.
1. Set the Paper Type lever to cut sheet mode.
2. To activate menu mode:
(a) Ensure that the printer is powered ON.
(b) Place the cut sheet on the front Paper Tray.
The cut sheet is gripped by the printer.
(c) Press and hold down the CHR PITCH button and then the PRINT SPEED button
to enter menu mode, Menu print? is printed.
3. Press PRINT QUALITY (PRINT) button and the printer prints out all the menu items
currently selected and their corresponding settings.
4. Exit or proceed to change menu settings:
(a) To exit menu settings confirmation, save the current settings, press CHR PITCH
and PRINT SPEED buttons together. Save menu is printed.
Press LOAD/EJECT button to eject the cut sheet paper.
(b) To change the menu settings, see “Menu setting” on page 41.
TEAR + LF/FF On-line/Off-line
ML5720/ML5721 Performs microfeed (reverse) 1/144 inch
when paper is in tear off position.
ML5790/ML5791 Performs microfeed (reverse) 1/180 inch
when paper is in tear off position.
PRINT QUALITY + SEL On-line/Off-line
ML5720/ML5721 Performs microfeed (reverse) 1/144 inch
when paper is in Top of Form position.
ML5790/ML5791 Performs microfeed (reverse) 1/180 inch
when paper is in Top of Form position.
PRINT QUALITY + LF/
FF
On-line/Off-line
ML5720/ML5721 Performs microfeed (forward) 1/144 inch
when paper is in Top of Form position.
ML5790/ML5791 Performs microfeed (forward) 1/180 inch
when paper is in Top of Form position.
CHR.PITCH + PRINT
SPEED
On-line/Off-line Enters menu mode.
SWITCH STATUS FUNCTION
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ML5790 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ML5790 in the language / languages: English as an attachment in your email.

The manual is 5,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info