563101
55
Zoom out
Zoom in
Previous page
1/81
Next page
Operating instructions > 55
Serial I/F
cont.
(Displ-
ayed
when
connec-
ted to
Serial
Interface)
Diagnostic Test Select to perform input/
output diagnosis of
RS-232C interface
signals.
No
Yes
Busy Line Select to set the Busy
Line.
SSD-
SSD+
DTR
RTS
Baud Rate Select to set the Baud
Rate.
9,600 bps
4,800 bps
2,400 bps
1,200 bps
600 bps
300 bps
19,200 bps
DSR Signal Select the DSR Signal. Valid
Invalid
DTR Signal Select a method to
switch a DTR signal of a
serial interface.
Ready on Power Up
Ready on Select
Busy Time Select the minimum
time between BUSY to
READY.
0.2 sec
1.0 sec
Stop Bit Select the stop bit. 1 bit
2 bit
Receive error Select the receive error. Checked
Unchecked
CSF Bin 1
(Display-
ed when
Single-bin
Cut-sheet
feeder is
installed)
Line spacing Select line feed pitch 6 LPI
8 LPI
Page Width
(Displayed only for
ML5721/ML5791)
Change to 8 inch to print
on letter size paper.
203.2 mm (8”)
345.44 mm (13.6”)
Page Length Select the length of cut
sheet.
279.4 mm (11”)
296.3 mm (11 2/3”)
304.8 mm (12”)
355.6 mm (14”)
420.9 mm (16.57”)
76.2 mm (3”)
82.6 mm (3.25”)
84.7 mm (10/3”)
88.9 mm (3.5”)
93.1 mm (11/3”)
101.6 mm (4”)
127.0 mm (5”)
139.7 mm (5.5”)
152.4 mm (6”)
177.8 mm (7”)
203.2 mm (8”)
215.9 mm (8.5”)
Cut Sheet Auto
Eject Position
Select a printable area
at the bottom of cut
sheet paper in cut sheet
mode (the character
centre position).
6.35 mm (3/12 in)
12.7 mm (6/12 in)
14.82 mm (7/12 in)
GROUP ITEM FUNCTION SETS
ML5720/ML5721 ML5790/ML5791
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ML5721 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ML5721 in the language / languages: English as an attachment in your email.

The manual is 5,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info