563101
21
Zoom out
Zoom in
Previous page
1/81
Next page
Paper handling > 21
Tractors. Press the locking lever down to lock the right Pin Tractor in the desired
position.
9. Lower the top paper tray and slide it towards the front of the printer until the marks
align.
10. Press the LOAD/EJECT button. The continuous forms will be taken into the printer
and positioned at the first line print position and the SEL indicator will illuminate.
Dismounting the rear pin tractor
To dismount:
1. Ensure that the printer is turned OFF.
2. Remove the top tray by holding the tray by the tabs on both sides and pulling it up
from the printer.
3. Hold the Pin Tractor by its tabs on both sides.
NOTE
> Raise the top paper tray if the paper does not feed properly when the rear
tractor is used. This will stabilise the paper movement and prevent
significant misalignment between the sheets when multi-part paper is
used and also erratic line spacing.
> When loading a specific type of continuous media using the Rear Feed, if
you encounter paper jam, erratic line spacing or misalignment between
the sheets of the multi-part paper due to the paper crumpling at the
perforations and varying binding strength, use the optional pull tractor
(bottom feed) to load this type of media.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ML5721 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ML5721 in the language / languages: English as an attachment in your email.

The manual is 5,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info