563100
65
Zoom out
Zoom in
Previous page
1/81
Next page
Troubleshooting > 65
Improper cut sheet feed
No paper feed.
Sheets are located off the
paper guide.
Load sheets with their left
edges against the paper
guide.
Sheets are not loaded to the
end.
Load sheets to the end.
Continuous forms instead of
cut sheets are fed.
The printer is in the
continuous forms mode.
Eject the continuous forms
and select cut sheet mode for
the printer.
Paper distortion.
Sheets are not loaded to the
end, or they are not inserted
straight.
Load sheets to the end.
Paper with wrinkles, folds or
other defects.
Change paper.
Paper not specified for the
printer.
Use paper types specified for
the printer.
Unable to eject.
The LF/FF
button is pressed.
Press the LOAD/EJECT
button.
Improper continuous forms feed.
No line feed, and no paper
feed.
Paper is off the Pin Tractors. Reload paper correctly.
The adjust lever position does
not match the paper type.
Set the adjust lever to the
correct position.
Paper distortion or jam. Forms are loaded with their
left holes out of line with the
right ones.
Load forms with their left
holes in line with the right
ones.
Inadequate distance between
the left and right Pin Tractors,
making for loose paper.
Relocate the Pin Tractors to
tighten the paper.
Skew paper feeding. Move the paper to make it
straight.
Paper movement is blocked. Remove the blockage.
Paper source is too far from
the printer.
Move the paper source nearer
to the printer.
Paper not specified for the
printer.
Use paper types specified for
this printer.
Several blank lines appear in
the printout.
Skip over perforation spacing
is selected.
Cancel the skip over
perforation spacing.
The selected skip over
perforation spacing does not
match the physical tear-off
perforation positions.
The paper length selected in
the application does not
match the physical paper
length.
Match the paper length
selected in the application
with the physical paper
length in use.
Select the paper length in
number of lines in the
application.
Abnormal switchover between cut sheet and continuous forms modes.
No cut sheet feed. The printer is in continuous
forms mode.
Set the Paper Type lever to
cut sheet mode.
No continuous forms feed. The printer is in cut sheet
mode.
Set the Paper Type lever to
continuous forms mode.
PROBLEM CAUSE ACTION
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ML5720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ML5720 in the language / languages: English as an attachment in your email.

The manual is 5,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info